FRETS.NET

Paul Statman's Discussions (11)

Discussions Replied To (10) Replies Latest Activity

"Thanks, Paul. I had previously reamed out the original holes to fit the later post s…"

Paul Statman replied Jun 2, 2013 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"I took some better shots yesterday (because they didn't show up when I clicked on th…"

Paul Statman replied Jun 2, 2013 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Thanks to everyone who contributed to this discussion. I didn't get them at first -…"

Paul Statman replied Sep 30, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Thanks, Grahame ~ I had thought of doing that. I may get around to it later. I don't…"

Paul Statman replied Sep 30, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Drilled, fitted, and strung up."

Paul Statman replied Sep 29, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Thanks, Grahame~ I used a plug-cutter that looks like the Veritas ones. Scraping th…"

Paul Statman replied Sep 29, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"That's some sound advice, Paul. Thanks again for your reply. I'm going the 'plug' ro…"

Paul Statman replied Sep 29, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Tanks, Tom~ Unfortunately there are no luthiers locally to whom I would entrusted th…"

Paul Statman replied Sep 29, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Thanks, Frank. It was good to talk to you about this the other day. I hope it doesn'…"

Paul Statman replied Sep 29, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

"Thanks, Paul, but the holes are bigger than the bushings. I have to fill and drill t…"

Paul Statman replied Sep 29, 2010 to Plug and re-drill mandolin peghead

23 Jun 2, 2013
Reply by Ned Knepp

RSS

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service