FRETS.NET

Paul Breen's Discussions (411)

Discussions Replied To (402) Replies Latest Activity

"The dot markers at the end of the finger board will likely have screws under the inl…"

Paul Breen replied Sep 19, 2018 to Identifying a resonator style guitar and figuring out a neck reset.

9 Sep 19, 2018
Reply by onewent

"True that the string spread at the saddle creates a very slight compound radius on a…"

Paul Breen replied Sep 19, 2018 to Saddle radius

3 Sep 19, 2018
Reply by Paul Breen

"Assuming a cylindrical finger board and not a compound radius, I generally make my s…"

Paul Breen replied Sep 18, 2018 to Saddle radius

3 Sep 19, 2018
Reply by Paul Breen

"Came across this on a Gibson LP Jr. 10 or so years ago. Pulled the nut to this mess.…"

Paul Breen replied Sep 18, 2018 to Bought a Dobro. got a surprise...

6 Sep 23, 2018
Reply by Ed Minch

"The split is not so bad and could be glued. Some of the bottom surface looks chewed…"

Paul Breen replied Aug 1, 2018 to 12 string bridge reglue problem

23 Aug 1, 2018
Reply by Bruce Erickson

"Bruce, the 3/4" thick Aluminum will hold the heat longer. I think the 3/8" would be…"

Paul Breen replied Aug 1, 2018 to 12 string bridge reglue problem

23 Aug 1, 2018
Reply by Bruce Erickson

"Looks like the editing fields are working today.... Just to be clear, the wet paper…"

Paul Breen replied Aug 1, 2018 to 12 string bridge reglue problem

23 Aug 1, 2018
Reply by Bruce Erickson

"Hmm, edit option not working either. Just tried that to see if I could add images th…"

Paul Breen replied Jul 31, 2018 to 12 string bridge reglue problem

23 Aug 1, 2018
Reply by Bruce Erickson

"Heating and clamping flat will also fix a twist. I use 3/4" thick Aluminum scrap I…"

Paul Breen replied Jul 31, 2018 to 12 string bridge reglue problem

23 Aug 1, 2018
Reply by Bruce Erickson

"http://fretsnet.ning.com/forum/topics/to-those-using-a-pressure-cooker-as-a-steam-ge…"

Paul Breen replied May 25, 2018 to New stew mac heat stick

9 Jun 19, 2018
Reply by Ian Pender

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service