FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"Antonio is right that you should loosen (not tighten) the truss rod first. Less than…"

Greg Mirken replied Jan 18, 2010 to Lighter string buzz

 2 Jan 18, 2010
Reply by Greg Mirken

"Doesn't matter what order you do the repairs in. Do you have a means to align the cr…"

Greg Mirken replied Jan 5, 2010 to Advice sought on repairs to Taylor Baby soundboard

 9 Jan 6, 2010
Reply by Christian Johnson

"Ditto on Frank's advice. It can make all the difference."

Greg Mirken replied Jan 5, 2010 to Flattening a warped neck

 11 May 15, 2010
Reply by Pierre-Antoine Roiron

"I suspect the Bridge Doctor would give up before the guitar. But don't take a chance…"

Greg Mirken replied Jan 5, 2010 to JLD Bridge Doctor

 4 Jun 24, 2015
Reply by Paul Storrie

"You might try a product called Nev-R-Dull. It's an impregnated wadding that comes in…"

Greg Mirken replied Dec 17, 2009 to Cleaning old Brass Machine Heads

 4 Dec 18, 2009
Reply by Kelvin Monaghan

"The purpose of the liquid used in wet sanding is not lubrication. After all, you are…"

Greg Mirken replied Dec 16, 2009 to WD-40 for sanding, rub-out lubricant on finishes?

 7 Dec 16, 2009
Reply by FRANK

"Taylor bridges are flat from end to end across the top, so there tends to be more va…"

Greg Mirken replied Dec 9, 2009 to almost no break angle... but don't really suffer from string imbalance

 7 Dec 9, 2009
Reply by Tim Mace

"StewMac"

Greg Mirken replied Dec 4, 2009 to banjo machine heads

 2 Dec 4, 2009
Reply by kiwi fingerle

"Mike, you can even leave the fretboard extension glued and pull mylar-backed sandpap…"

Greg Mirken replied Nov 14, 2009 to "Art & Lutherie" 12-string....

 3 Nov 15, 2009
Reply by Mike Kolb

"Paul, from your first photo it looks like the point of contact on your replacement n…"

Greg Mirken replied Nov 9, 2009 to equal temperment ? intonation ?

 15 Nov 13, 2009
Reply by Jeffrey L. Suits

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service