FRETS.NET

Greg Mirken's Discussions (636)

Discussions Replied To (634) Replies Latest Activity

"Your description of the relief following the curvature of a vibrating string is exac…"

Greg Mirken replied Oct 16, 2008 to Fretboart curvature

4 Oct 20, 2008
Reply by danove

"It will do no harm to squish a little Titebond under the end of the fingerboard and…"

Greg Mirken replied Oct 16, 2008 to fretboard lifting off body, martin guitar

9 Oct 16, 2008
Reply by danove

"From your description, I don't see any need to remove the neck. Action OK? Greg"

Greg Mirken replied Oct 15, 2008 to fretboard lifting off body, martin guitar

9 Oct 16, 2008
Reply by danove

"These are what I use. They leave a very smooth hole with no chattering. http://www…"

Greg Mirken replied Oct 9, 2008 to Countersinking bridge pin holes

6 Oct 10, 2008
Reply by Matt Winfree

"You can thin the CA with acetone, you know, for better penetration. The other proble…"

Greg Mirken replied Oct 7, 2008 to "Ebonized" woods

3 Oct 9, 2008
Reply by C Herb Hickman

"That was made by Jimmy Moon, in Glasgow, and his instruments are indeed very nice. L…"

Greg Mirken replied Oct 6, 2008 to Repairing a soundboard crack in a flat-top mandolin

3 Oct 6, 2008
Reply by Jim MacDaniel

"Like Jim, I prefer hot hide glue. But you are not a professional repairman, and if y…"

Greg Mirken replied Oct 2, 2008 to New guy here with repair questions

3 Oct 2, 2008
Reply by Tad

"Yes, without doing anything else, heating the space will lower the RH, because warm…"

Greg Mirken replied Sep 28, 2008 to Relative Humidity

7 Jun 6, 2019
Reply by Eric P. Wilson

"Brian, does your first photo indicate that the strings were running off to the trebl…"

Greg Mirken replied Sep 23, 2008 to Crooked Guitar?

4 Sep 23, 2008
Reply by Brian Farrell

"Caveat: I have no experience with KTM-9, but a fair amount of finish experience. I d…"

Greg Mirken replied Sep 11, 2008 to Beginner question: Achieving a nice finish

12 Dec 12, 2008
Reply by Gary Nutt

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service