FRETS.NET

Jeff Perkins's Discussions (151)

Discussions Replied To (124) Replies Latest Activity

"It's not a dent, it's bare wood where the finish has been removed. The question is,…"

Jeff Perkins replied May 25, 2013 to Help with a Martin touchup Repair

9 May 27, 2013
Reply by Joshua Levin-Epstein

"I do that already, but just for giggles, would you explain step by step your process…"

Jeff Perkins replied May 25, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

"i already have some of the same red mahogany. i've used it a few times with reasonab…"

Jeff Perkins replied May 25, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

"Do you wind up mixing them together I'm assuming?"

Jeff Perkins replied May 25, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

"Anyone else have any "Starting Base" recipe's they'd like to share??"

Jeff Perkins replied May 24, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

"Thanks, it looks pretty dang close"

Jeff Perkins replied May 24, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

"Thanks, that's a good start!!"

Jeff Perkins replied May 24, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

"Thanks Mike.....I might just give up on this one. Everyone says the same thing......…"

Jeff Perkins replied May 24, 2013 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"i've been using a steel rectangular tube with a heat gun as heat source and some U c…"

Jeff Perkins replied May 24, 2013 to Neck Heat Press Device?

37 Aug 10
Reply by Werther Ellerbrock

"It's too bad you can't just take your guitar to home depot and have them mix up a ba…"

Jeff Perkins replied May 24, 2013 to Martin Mahogany Stain Recipe

23 Jul 2, 2014
Reply by Ned Knepp

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service