FRETS.NET

harrison phipps's Discussions (114)

Discussions Replied To (100) Replies Latest Activity

"I attach the inlay where I want it with double sided tape and with a sharp thin blad…"

harrison phipps replied Feb 2, 2013 to How to add inlays?

5 Feb 3, 2013
Reply by Alvaro Balderrama Chiappe

"Sorry if I misunderstood your questions, the pic makes it clear. Cheapest and quicke…"

harrison phipps replied Jan 31, 2013 to Wiring an active preamp to output jack?

18 Aug 22, 2013
Reply by Steven D. Wilson

"You have to wire the jack yourself"

harrison phipps replied Jan 30, 2013 to Wiring an active preamp to output jack?

18 Aug 22, 2013
Reply by Steven D. Wilson

"StewMac, LMII and AllParts carry supply them via mail-order, Fry's carries them if t…"

harrison phipps replied Jan 30, 2013 to Wiring an active preamp to output jack?

18 Aug 22, 2013
Reply by Steven D. Wilson

"I just fixed a uke with a Shadow preamp. The undersaddle pup plugs into the preamp w…"

harrison phipps replied Jan 30, 2013 to Wiring an active preamp to output jack?

18 Aug 22, 2013
Reply by Steven D. Wilson

"No advise on dealing with boss and coworkers. Do everything that is needed to make t…"

harrison phipps replied Jan 27, 2013 to Music Store Bosses...

6 Jan 28, 2013
Reply by William F.Eden

"I think you will get the shrunken top to move easier and further if you loosen the i…"

harrison phipps replied Jan 24, 2013 to Franks side bulge jigs question

11 Jan 27, 2013
Reply by Eric Steven Johansen

"Measure from the inside face of the nut to the center of the 12th fret, add 1/8 to 3…"

harrison phipps replied Jan 24, 2013 to Exact measurements of Gibson 24-3/4" scale

18 Jan 26, 2013
Reply by nathan clark

"Years ago I bent a 90 degree "L" in a wrench for tightening those loose inside nuts.…"

harrison phipps replied Jan 23, 2013 to Tightening an unreachable jack

8 Jan 24, 2013
Reply by tadej bratkovic

"I have fixed similar necks by carefully filing the fret ends until the file just hit…"

harrison phipps replied Jan 22, 2013 to Fret tangs sticking out the side of a Fender Tele

9 Jan 23, 2013
Reply by Mark Pollock

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service