FRETS.NET

Ron Frazier's Discussions (325)

Search Forum

View

Discussions Replied To (321) Replies Latest Activity

"use a little wood putty where it shows at side the bridge then clean all the glue of…"

Ron Frazier replied Jan 28, 2009 to Soundboard Splinters

 9 Jan 29, 2009
Reply by Jerry Ryan

"Joey Yes the body is all normal sizes. Around 1/8/inch all but the top. The braces…"

Ron Frazier replied Jan 27, 2009 to Building Resonator Guitars

 39 Oct 4, 2013
Reply by Don Korth

"Just oil it. Like Pledge funature polish. Martin used lard for a lot of years. Ron"

Ron Frazier replied Jan 27, 2009 to Best Fret Board Finish

 14 Jan 31, 2009
Reply by Rob

"I will try to send some pictures. Ron"

Ron Frazier replied Jan 27, 2009 to Building Resonator Guitars

 39 Oct 4, 2013
Reply by Don Korth

"I would fill the slot in with another piece of wood then route it out the proper siz…"

Ron Frazier replied Jan 26, 2009 to Nut Slot is 2 wide.

 4 Feb 3, 2009
Reply by MTC

"If you have the strings to low at the first fret it is hard to hammer on .You have t…"

Ron Frazier replied Jan 23, 2009 to Nut slot question?

 7 Aug 3, 2009
Reply by Antonio Cotichini

"I hold the file at a 30 degree angle or some where there and file full length of the…"

Ron Frazier replied Jan 23, 2009 to Filing Fret Ends

 10 Jan 26, 2009
Reply by Russell Vance

"I called Stu-Mac today and ask them this question and they said to cut a grove and u…"

Ron Frazier replied Jan 23, 2009 to Nut files

 20 Aug 23, 2009
Reply by Dave Yelverton

"keep it stock!!!!! Leave it alone. Ron"

Ron Frazier replied Jan 22, 2009 to Removing washer indentations on Martin Headstock

 8 Jan 28, 2009
Reply by Jim Bancroft

"Traded for a brand new Washburn guitar that some on had dropped that had a 2 inch ho…"

Ron Frazier replied Jan 22, 2009 to Upper bout sound holes vs standard sound hole

 7 Jan 22, 2009
Reply by Ron Frazier

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service