FRETS.NET

John's Discussions (337)

Discussions Replied To (309) Replies Latest Activity

"I work in my garage and my basement. Having French cleats in both shops allows me to…"

John replied Apr 28, 2015 to Luthier shop Architecture

20 Apr 28, 2015
Reply by Mario Cardenas

"That's a great plug Mark and I think pocket screws would work well, but, my father u…"

John replied Apr 25, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"I like to go to the mechanic that actually fixes my car as opposed to the mechanic t…"

John replied Apr 25, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"The customer owns a70s fender neck and this is a70s fender body, the grain runs exac…"

John replied Apr 24, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"One of the challenging aspects of this repair was the customers request that it be d…"

John replied Apr 24, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"I'd considered that and I could cut tapered plugs to match from the offcut. Would it…"

John replied Apr 23, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"Do you mean from the outside of the horn?"

John replied Apr 23, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"We were referring to that picture as the shark tele, clearly there's room for interp…"

John replied Apr 21, 2015 to Rehorning a telecaster

32 May 1, 2015
Reply by John

"Check pintrest and tumblr. Put a loft over one of the bench areas so you can use go…"

John replied Apr 20, 2015 to Luthier shop Architecture

20 Apr 28, 2015
Reply by Mario Cardenas

"Those "pipe clamps" are great. I use feeler guages for small scrapers and shim stock…"

John replied Apr 17, 2015 to Freebie or Cheapie Tools and Devices

117 Apr 10, 2017
Reply by Roger Häggström

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service