FRETS.NET

William F.Eden's Discussions (620)

Discussions Replied To (601) Replies Latest Activity

"Dan I just use a 1/2" sharp chisel and then the Orbital sander 100 grit...But first…"

William F.Eden replied May 1, 2009 to Best way to trim purfling flush with soundboard?

11 May 30, 2009
Reply by Bob Webster

"Wy don't you glue a spruce splint in the top?????????"

William F.Eden replied Apr 27, 2009 to Top crack and a heel lift

6 Apr 28, 2009
Reply by Ron Moucka

"I just new you could do it Paul congradgulation Biill""""""""'"

William F.Eden replied Apr 21, 2009 to WELL IT WORKED OUT

1 Apr 21, 2009
Reply by William F.Eden

"I had i guy bring me a D-18 one day when I was down in Florida for a holiday and it…"

William F.Eden replied Apr 5, 2009 to D-18 side patch

4 Apr 5, 2009
Reply by Bob Gaddis

"Thanks Bob I like what you are doing .I have only been able to see the first two day…"

William F.Eden replied Mar 22, 2009 to HOW I DO IT unedited photo essay on building a Tedrow Concertina

2 Mar 22, 2009
Reply by William F.Eden

"I ALWAS USE Electiric tap to mask with I have had very good luck doing that. With on…"

William F.Eden replied Mar 15, 2009 to Rise in back strip

11 Mar 16, 2009
Reply by Ned Knepp

"Well Bob I din't think the Acetone would touch the water base filler.And this mornin…"

William F.Eden replied Mar 14, 2009 to Rise in back strip

11 Mar 16, 2009
Reply by Ned Knepp

"That is what I tryed the first time Ronnie.As far as PPPatience goes I think I have…"

William F.Eden replied Mar 14, 2009 to Rise in back strip

11 Mar 16, 2009
Reply by Ned Knepp

"Bob do you think that the acetone will not get under the masking and bled into the r…"

William F.Eden replied Mar 14, 2009 to Rise in back strip

11 Mar 16, 2009
Reply by Ned Knepp

"I wolud not build a Accstic Guitar out of Spalding Maple under Any condition .I trye…"

William F.Eden replied Mar 11, 2009 to Any tips on Bending Spalted Maple sides?

23 Mar 16, 2009
Reply by Bob Webster

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service