FRETS.NET

Cal Maier's Discussions (32)

Discussions Replied To (32) Replies Latest Activity

"The pick up seems to be working OK, These things were fairly fragile in nature so it…"

Cal Maier replied Apr 6, 2013 to Piezo pickups

15 Apr 6, 2013
Reply by Paul Verticchio

"Sylvan, The pick up I have is 2 13/16" long and will fit in a 3/32" saddle slot, so…"

Cal Maier replied Apr 6, 2013 to Piezo pickups

15 Apr 6, 2013
Reply by Paul Verticchio

"Hi Sylvan, I may have the unit you are looking for. This one is a BB centre lead pic…"

Cal Maier replied Apr 6, 2013 to Piezo pickups

15 Apr 6, 2013
Reply by Paul Verticchio

"Not sure what you're meaning William? Once the balloon is inflated in the guitar and…"

Cal Maier replied Mar 20, 2013 to Balloon to fill soundhole while spraying .

13 Mar 20, 2013
Reply by Cal Maier

"I use a balloon to hold an inverted plastic chip dip or similar lid in the sound hol…"

Cal Maier replied Mar 20, 2013 to Balloon to fill soundhole while spraying .

13 Mar 20, 2013
Reply by Cal Maier

"Great job Brian, Glad to have been some help to you. Cheers, Cal"

Cal Maier replied Mar 12, 2013 to Cutting 3ply pick guard material ?

16 Mar 13, 2013
Reply by William F.Eden

"Your welcome Brian, I'm sure your project will work out fine, just take your time an…"

Cal Maier replied Mar 9, 2013 to Cutting 3ply pick guard material ?

16 Mar 13, 2013
Reply by William F.Eden

"Hi Brian, I'll try to give you some advice on drilling and cutting this stuff, I use…"

Cal Maier replied Mar 9, 2013 to Cutting 3ply pick guard material ?

16 Mar 13, 2013
Reply by William F.Eden

"Hi David, That is correct, the nut is only for spacing and to keep the strings from…"

Cal Maier replied Mar 7, 2013 to Dressing w/ a Zero Fret

25 Sep 10, 2015
Reply by James O'Rear

"+1 for the LMI rod. Also you could look at the Allied Lutherie double action bass gu…"

Cal Maier replied Mar 6, 2013 to Hot rod adjustable truss rod @ Stewmac for a Danelectro DC Bass

2 Mar 6, 2013
Reply by Cal Maier

RSS

© 2022   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service