FRETS.NET

Ned Knepp's Discussions (1,791)

Discussions Replied To (1783) Replies Latest Activity

"My Tenor's scale length is just about 23 inches. I agree with Joshua that this is cl…"

Ned Knepp replied Nov 22, 2016 to is this a Tenor guitar ?

8 Nov 25, 2016
Reply by ron stanovich

"Why Epoxy?"

Ned Knepp replied Oct 28, 2016 to spruce pigmented epoxy?

15 Nov 2, 2016
Reply by David Farmer

"I used an airbrush because It's the only decent spray rig I have available now. Sinc…"

Ned Knepp replied Oct 22, 2016 to Experience spraying shellac?

13 Oct 27, 2016
Reply by Peter Poyser

"I've tried this and had mixed results too. I used an airbrush and had to thin my reg…"

Ned Knepp replied Oct 21, 2016 to Experience spraying shellac?

13 Oct 27, 2016
Reply by Peter Poyser

"My personal opinion is that a used guitar can/should look used. From the pictures, i…"

Ned Knepp replied Oct 18, 2016 to Maple fretboard restore opinions needed

11 Oct 18, 2016
Reply by Silverburst

"I agree with Greg and I'm only adding a comment to give my experience with using inf…"

Ned Knepp replied Oct 13, 2016 to Regluing loose archtop reinforcement?

4 Oct 14, 2016
Reply by ron stanovich

"Not going to pretend that I know much about it but a question that popped up in my m…"

Ned Knepp replied Sep 21, 2016 to income equality

7 Sep 30, 2016
Reply by Stewart C Simon

"Since I'm usually trying to pull frets from old, dried out fingerboards. I chip out…"

Ned Knepp replied Sep 6, 2016 to Test of glue for gluing in frets.

10 Sep 8, 2016
Reply by Claus Holm Jensen

"I don't now if I should ask about this or not, George but I will anyway.  Am I seein…"

Ned Knepp replied Jul 21, 2016 to Martin Ivory Straight Through Pegs.....2 Questions

8 Jul 23, 2016
Reply by Steve Bettesworth

"George, I don't know what the hole liner is but I think it looks like end grain maho…"

Ned Knepp replied Jul 21, 2016 to Martin Ivory Straight Through Pegs.....2 Questions

8 Jul 23, 2016
Reply by Steve Bettesworth

RSS

© 2019   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service