FRETS.NET

Ian Pender's Discussions (110)

Discussions Replied To (90) Replies Latest Activity

"I have a cheap Stella guitar that I reset the neck on that had a split block and sid…"

Ian Pender replied Mar 20, 2017 to best wood for neck dovetail shims?

8 Mar 25, 2017
Reply by Frank Ford

"I've seen someone recommend using Holly veneer for neck shims, since it apparently c…"

Ian Pender replied Mar 19, 2017 to best wood for neck dovetail shims?

8 Mar 25, 2017
Reply by Frank Ford

"I posted about this guitar a few months back, so this will serve as a sort of update…"

Ian Pender replied Mar 2, 2017 to Neck Re-Set Gallery

153 Jun 22, 2023
Reply by LarrySB

"That was my first recommendation, although I think the guys are concerned about the…"

Ian Pender replied Feb 3, 2017 to Looking for industrial humidifier recommendations for a large retail shop

4 Feb 6, 2017
Reply by Thomas James

"Yeah, that's what I'll probably end up doing. There's a lot of wood torn up from the…"

Ian Pender replied May 25, 2016 to Washburn parlor top radius

14 May 25, 2016
Reply by Ian Pender

"George, is there another style of bridge that might be wider, front to back, than th…"

Ian Pender replied May 24, 2016 to Washburn parlor top radius

14 May 25, 2016
Reply by Ian Pender

"Bridge pin hole spacing is even all the way across. Thanks for sending me all of tha…"

Ian Pender replied May 19, 2016 to Washburn parlor top radius

14 May 25, 2016
Reply by Ian Pender

"I had a customer once request that I dress the frets on his Les Paul down to match t…"

Ian Pender replied May 18, 2016 to CROSS OVER TOOLS

11 May 18, 2016
Reply by Ian Pender

"Alrighty, cool, thanks for the replies everyone! The sag is already less pronounced,…"

Ian Pender replied May 16, 2016 to Washburn parlor top radius

14 May 25, 2016
Reply by Ian Pender

"Really? The back has a pretty good radius to it, I wasn't sure if the top had a matc…"

Ian Pender replied May 15, 2016 to Washburn parlor top radius

14 May 25, 2016
Reply by Ian Pender

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service