FRETS.NET

Jeff Highland's Discussions (324)

Discussions Replied To (319) Replies Latest Activity

"If you are going to make a new bridge anyhow you could just plane this one off till…"

Jeff Highland replied Apr 28, 2010 to Removing a bridge - alternative methods?

7 Apr 28, 2010
Reply by David Houchens

"You are going to be cutting 16mm slots so why not use the 1/2"bit and 1/2" bearing c…"

Jeff Highland replied Apr 26, 2010 to Router Bit Search

18 May 1, 2010
Reply by Pete Cyr

"The upper transverse brace UTB the one under the end of the firetboard has collapsed…"

Jeff Highland replied Apr 20, 2010 to Fixing caved in top

16 Apr 20, 2010
Reply by Jeff Highland

"IMHO , expecting humidifying the guitar to fix this is wishful thinking, but talking…"

Jeff Highland replied Apr 20, 2010 to Fixing caved in top

16 Apr 20, 2010
Reply by Jeff Highland

"If all the other strings are Ok then the bridge placement is ok probably something s…"

Jeff Highland replied Apr 20, 2010 to Intonation Out on A String only?

16 Apr 20, 2010
Reply by Jeff Highland

"Millions of Martins inotate fine with a straight saddle. there is no reason this one…"

Jeff Highland replied Apr 14, 2010 to Intonation Out on A String only?

16 Apr 20, 2010
Reply by Jeff Highland

"I still seem to manage to bend a side back to front after a dozen or so instruments."

Jeff Highland replied Apr 14, 2010 to most common goof up

19 Apr 15, 2010
Reply by FRANK

"Building with the humidity too high."

Jeff Highland replied Apr 13, 2010 to most common goof up

19 Apr 15, 2010
Reply by FRANK

"Looks like the Upper Transverse Brace UTB above the soundhole has either failed or b…"

Jeff Highland replied Apr 12, 2010 to Fixing caved in top

16 Apr 20, 2010
Reply by Jeff Highland

"Nothing wrong with this neck joint except that the fretboard has been cut. Are you s…"

Jeff Highland replied Apr 6, 2010 to Opinions needed on (unique neck joint) reset.

12 Apr 7, 2010
Reply by Eric Steven Johansen

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service