FRETS.NET

I am going to look at some lumber soon. Old mahogany. I was wondering if I can get some quick help about how to select wood for a neck - quater sawn, what about the grain angle? I guess just general advice of what to look for... Thanks!

Tags: lumber, neck

Views: 189

Reply to This

Replies to This Discussion

Hi Micha,

The grain angle should be 90 degrees to the face and back of the neck. lllllllllllll

I have seen a few descent necks where the grain is slightly rift /////////// , but preferably you would want it to be quartered at 90 degrees to the face. There would be less chance of twisting, etc. with perpendicular grain. I'll try attaching a photo that shows a quarter sawn mahogany neck, note the grain direction in the heel.

Cheers,

Cal

Attachments:

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service