New nut for a Fender Jazz - FRETS.NET2024-03-29T11:22:05Zhttps://fretsnet.ning.com/forum/topics/new-nut-for-a-fender-jazz?commentId=2177249%3AComment%3A88453&feed=yes&xn_auth=noIt's a good one too (:
Again…tag:fretsnet.ning.com,2012-06-01:2177249:Comment:887232012-06-01T18:16:50.674ZPaul Verticchiohttps://fretsnet.ning.com/profile/PaulVerticchio
<p>It's a good one too (:</p>
<p></p>
<p>Again, beautiful work FRANK (-:</p>
<p></p>
<p>It's a good one too (:</p>
<p></p>
<p>Again, beautiful work FRANK (-:</p>
<p></p> its an illusion Paul V tag:fretsnet.ning.com,2012-05-31:2177249:Comment:886382012-05-31T16:45:08.152ZFRANKhttps://fretsnet.ning.com/profile/PAUL
<p>its an illusion Paul V </p>
<p>its an illusion Paul V </p> Beautiful metal work FRANK (-…tag:fretsnet.ning.com,2012-05-31:2177249:Comment:886342012-05-31T16:33:53.853ZPaul Verticchiohttps://fretsnet.ning.com/profile/PaulVerticchio
<p><em><strong>Beautiful</strong></em> metal work FRANK (-:</p>
<p>In the second pic, is it an optical illusion or has the binding separated on the treble side at the nut?</p>
<p>Best of luck my friend. (:</p>
<p><em><strong>Beautiful</strong></em> metal work FRANK (-:</p>
<p>In the second pic, is it an optical illusion or has the binding separated on the treble side at the nut?</p>
<p>Best of luck my friend. (:</p> Well I made the Nipped tang o…tag:fretsnet.ning.com,2012-05-31:2177249:Comment:886262012-05-31T01:33:32.873ZFRANKhttps://fretsnet.ning.com/profile/PAUL
<p>Well I made the Nipped tang on the American Fender Brass nut I used my 2 hp router to nip it, hand fit into the slot ,shaped by hand , buffed polished this one took my entire day but its worth it thanks guys for your support :) sending good vibes your way now $$$$$$$$$$$$$$$$$$$$$$$$$$</p>
<p>Well I made the Nipped tang on the American Fender Brass nut I used my 2 hp router to nip it, hand fit into the slot ,shaped by hand , buffed polished this one took my entire day but its worth it thanks guys for your support :) sending good vibes your way now $$$$$$$$$$$$$$$$$$$$$$$$$$</p> I did nip the tang I am happy…tag:fretsnet.ning.com,2012-05-30:2177249:Comment:885582012-05-30T21:27:04.535ZFRANKhttps://fretsnet.ning.com/profile/PAUL
<p>I did nip the tang I am happy with it Ill post it this evening when I am done :):):):) $$$$ sending good vibes Now $$$$</p>
<p>I did nip the tang I am happy with it Ill post it this evening when I am done :):):):) $$$$ sending good vibes Now $$$$</p> You are a lucky man Frank .If…tag:fretsnet.ning.com,2012-05-30:2177249:Comment:887092012-05-30T21:04:53.834ZWilliam F.Edenhttps://fretsnet.ning.com/profile/WilliamFEden
<p>You are a lucky man Frank .If it had been mine I would likely of had to take a cold chisel and slege to it .looks good .Bill...............</p>
<p>You are a lucky man Frank .If it had been mine I would likely of had to take a cold chisel and slege to it .looks good .Bill...............</p> Aw c'mon, there's gotta be a…tag:fretsnet.ning.com,2012-05-30:2177249:Comment:885552012-05-30T20:04:12.515ZMark Pollockhttps://fretsnet.ning.com/profile/MarkPollock
<p>Aw c'mon, there's gotta be a jig for nipping the edges off a brass nut. At least there must be a Youtube video about it.</p>
<p>Aw c'mon, there's gotta be a jig for nipping the edges off a brass nut. At least there must be a Youtube video about it.</p> My crazy guess was right nipp…tag:fretsnet.ning.com,2012-05-30:2177249:Comment:887062012-05-30T18:31:21.081ZFRANKhttps://fretsnet.ning.com/profile/PAUL
<p>My crazy guess was right nipped like a fret Tang Ahhhhhhhhh tension breaker it was held in by Lacquer only .So it is real binding on this one , I am gonna cut the rest of the slot right through the binding and expose the ends of the new nut because I am not gonna attempt to build a brass nut around this Binding .</p>
<p>My crazy guess was right nipped like a fret Tang Ahhhhhhhhh tension breaker it was held in by Lacquer only .So it is real binding on this one , I am gonna cut the rest of the slot right through the binding and expose the ends of the new nut because I am not gonna attempt to build a brass nut around this Binding .</p> yep thanks Christian Jtag:fretsnet.ning.com,2012-05-30:2177249:Comment:884532012-05-30T02:00:36.633ZFRANKhttps://fretsnet.ning.com/profile/PAUL
<p>yep thanks Christian J</p>
<p>yep thanks Christian J</p> Be sure to score along the fi…tag:fretsnet.ning.com,2012-05-30:2177249:Comment:884462012-05-30T01:25:34.578ZChristian Johnsonhttps://fretsnet.ning.com/profile/ChristianJohnson
<p>Be sure to score along the fingerboard side and the back too with a sharp knife. Run it right along the nut/fingerboard joint. The lacquer (poly) can pull up there too.</p>
<p>Be sure to score along the fingerboard side and the back too with a sharp knife. Run it right along the nut/fingerboard joint. The lacquer (poly) can pull up there too.</p>