I have a nice birdseye maple neck. The nut slot is about 1-2 32nds to wide on the back side. The spacing from the front of the nut to the 1st fret seems fine. I was trying to figure out a way to fill it back in. I have thought of ordering a larger blank and build a new nut. It might be fun but I have never done that before. I know you can do tricks with CA glue and wood dust, but i can figure out how to dam it to keep it out of the slot. I have installed LSR roller nuts with success, but i always used the back of the slot as a guide for the cut. Any ideas or thoughts would be appreciated.
Thank you for adding to the forum.