Searching for 100k ohm pots for use with Seymour Duncan actives. - FRETS.NET2024-03-29T10:55:29Zhttps://fretsnet.ning.com/forum/topics/searching-for-100k-ohm-pots?commentId=2177249%3AComment%3A29136&x=1&feed=yes&xn_auth=noRockin' deal. Thanks a millio…tag:fretsnet.ning.com,2010-05-04:2177249:Comment:291362010-05-04T22:50:50.780ZRandall Curtis Bowmanhttps://fretsnet.ning.com/profile/RandallCurtisBowman
Rockin' deal. Thanks a million.
Rockin' deal. Thanks a million. Try this?
http://www.allpart…tag:fretsnet.ning.com,2010-05-04:2177249:Comment:291242010-05-04T06:42:46.302ZTom Krebshttps://fretsnet.ning.com/profile/TomKrebs
Try this?<br />
<br />
<a href="http://www.allparts.com/SearchResults.asp?search=100k&x=0&y=0" target="_blank">http://www.allparts.com/SearchResults.asp?search=100k&x=0&y=0</a>
Try this?<br />
<br />
<a href="http://www.allparts.com/SearchResults.asp?search=100k&x=0&y=0" target="_blank">http://www.allparts.com/SearchResults.asp?search=100k&x=0&y=0</a> Thanks for all the suggestion…tag:fretsnet.ning.com,2010-05-04:2177249:Comment:291212010-05-04T03:11:51.499ZRandall Curtis Bowmanhttps://fretsnet.ning.com/profile/RandallCurtisBowman
Thanks for all the suggestions. I'm looking at some of those sites now. The only thing I know is that the SD site lists 100k pots in the schematic.I think I paid around $60 for the whole set, and other than missing the pots, still a good deal. I'm just not having much luck finding audio taper pots, split and splined to fit Fender Strat knobs.
Thanks for all the suggestions. I'm looking at some of those sites now. The only thing I know is that the SD site lists 100k pots in the schematic.I think I paid around $60 for the whole set, and other than missing the pots, still a good deal. I'm just not having much luck finding audio taper pots, split and splined to fit Fender Strat knobs. After I posted this I checked…tag:fretsnet.ning.com,2010-05-03:2177249:Comment:291092010-05-03T19:54:34.371ZRob Mercurehttps://fretsnet.ning.com/profile/RobMercure
After I posted this I checked out the All Electronics site for other reasons and they have numerous 100K pots - both audio and linear - for less than $1.00 each.<br />
R
After I posted this I checked out the All Electronics site for other reasons and they have numerous 100K pots - both audio and linear - for less than $1.00 each.<br />
R Is there something special ab…tag:fretsnet.ning.com,2010-05-03:2177249:Comment:291072010-05-03T18:38:57.279ZRob Mercurehttps://fretsnet.ning.com/profile/RobMercure
Is there something special about these 100K pots? This is an extremely common value and Mouser or Digikey or MCM should have them. As far as replacing them with a different value as Len suggested I'd go higher before going lower as higher can only give a slight treble emphasis while lower can form an RC filter with the cable capacitance and filter out some of the highs - especially a 4:1 change - with normal manufacturing tolerances anything between 75-125K shouldn't be that noticable as long…
Is there something special about these 100K pots? This is an extremely common value and Mouser or Digikey or MCM should have them. As far as replacing them with a different value as Len suggested I'd go higher before going lower as higher can only give a slight treble emphasis while lower can form an RC filter with the cable capacitance and filter out some of the highs - especially a 4:1 change - with normal manufacturing tolerances anything between 75-125K shouldn't be that noticable as long as you're close to the desired taper.<br />
<br />
Rob Do you know why they require…tag:fretsnet.ning.com,2010-05-03:2177249:Comment:290782010-05-03T08:49:50.805ZLen Biglinhttps://fretsnet.ning.com/profile/LenBiglin
Do you know why they require 100K? Actives are probably fine with 25K , I think thats what EMG use .Len
Do you know why they require 100K? Actives are probably fine with 25K , I think thats what EMG use .Len E BAYtag:fretsnet.ning.com,2010-05-03:2177249:Comment:290692010-05-03T03:37:59.993ZFRANKhttps://fretsnet.ning.com/profile/PAUL
E BAY
E BAY