What Kind of Glue Is This? - FRETS.NET2024-03-29T01:32:28Zhttps://fretsnet.ning.com/forum/topics/what-kind-of-glue-is-this?commentId=2177249%3AComment%3A57691&feed=yes&xn_auth=noEither of the above mentioned…tag:fretsnet.ning.com,2011-05-18:2177249:Comment:574432011-05-18T15:13:42.237ZJay Lowehttps://fretsnet.ning.com/profile/JayLowe928
<p>Either of the above mentioned methods will probably work, but if it were laying in front of me I'd just soften it a bit with hot water and scrape it off. That's the easy part of this job. The fun part will be replacing the bridge plate and patching the top.</p>
<p> </p>
<p>Good luck.</p>
<p> </p>
<p>Jay</p>
<p>Either of the above mentioned methods will probably work, but if it were laying in front of me I'd just soften it a bit with hot water and scrape it off. That's the easy part of this job. The fun part will be replacing the bridge plate and patching the top.</p>
<p> </p>
<p>Good luck.</p>
<p> </p>
<p>Jay</p> It appears to be titebond or…tag:fretsnet.ning.com,2011-05-18:2177249:Comment:573662011-05-18T10:40:36.831ZJim Bancrofthttps://fretsnet.ning.com/profile/JimBancroft
<p>It appears to be titebond or a similar glue, it's not epoxy. You can simply scrape or sand it off.</p>
<p> </p>
<p>Jim</p>
<p>It appears to be titebond or a similar glue, it's not epoxy. You can simply scrape or sand it off.</p>
<p> </p>
<p>Jim</p> sounds like epoxytag:fretsnet.ning.com,2011-05-18:2177249:Comment:576912011-05-18T10:15:08.436ZTim Macehttps://fretsnet.ning.com/profile/TimMace478
sounds like epoxy
sounds like epoxy Or LMI white? It ain't HG for…tag:fretsnet.ning.com,2011-05-18:2177249:Comment:576882011-05-18T06:50:00.698ZGrahame Myershttps://fretsnet.ning.com/profile/GrahameMyers
<p>Or LMI white? It ain't HG for sure, good luck with removing it. Maybe with a bit of heat to make it softer? Try warming it with a heat gun (but <em>carefully</em>) Not more than 150°F (65°C)</p>
<p> </p>
<p>Grahame</p>
<p>Or LMI white? It ain't HG for sure, good luck with removing it. Maybe with a bit of heat to make it softer? Try warming it with a heat gun (but <em>carefully</em>) Not more than 150°F (65°C)</p>
<p> </p>
<p>Grahame</p> Might be Titebond.tag:fretsnet.ning.com,2011-05-18:2177249:Comment:574342011-05-18T05:55:18.898ZChris Rochowhttps://fretsnet.ning.com/profile/ChrisRochow
Might be Titebond.
Might be Titebond.