Thank you, Len! That's a big job you did...i'm not a guitar tech, so it's not for me. I just removed the piece of plastic on the headstock,cause I thought that the rod is too short and it's possible to fix the problem by moving a stop washer further . On the x-ray that i did i saw that the rod is touching the stop washer and the nut is still too concave.
I can move the washer ahead but it doesn't help, the rod is moving freely inside of the neck and it's not broken, so I'm sure that something happened on the other side, neck joint, cause now i hear strange noise when i shake the guitar.I suspect that the bulb that is supposed to hold the rod on the neck joint somehow is not connected to truss rod anymore...
Hiya Len.
I’ve sworn off publicly posting so I send you my thoughts via this message.
Here are couple facts:
LO Jr.s are chosen by most players because they facilitate controlled feedback when sustaining a note at a saturated volume. Feedback in this case is not related to an overabundance of microphonics within the pickup coil or shell.
This should not be confused with “squealing” which is caused by excessive gain in the player’s signal chain.
Your customer would be well served by trying pickups with a slightly lower output to minimize the current condition.
As a humorous query: does he actually perform on 10 less than a meter from his amp? Any guitar will feedback under that condition 😉
This is one of those things that players have to make logical choices to eliminate. He may have to rethink any gain based device in his signal chain, essentially his choice of instruments as he’s playing “the most wonderfully resonant guitars ever produced. Again, most guitarists choose the LP Jr expressly for that reason.
Also, if he’s using a tube amp he may have a noisy preamp valve. If that’s the case, he should have his amp checked and serviced by a QUALIFIED tube amp technician.
There’s also the possibility that his playing distance and position is greatly contribute to the problem.
If he’s an experienced touring player, the latter is not the likely issue as 99% of guitarists figure this out on their own within a month of taking up the instrument.
Let me know if my info was germane to your eventual
resolution of the customer’s concerns.
btw: since I no longer post on the main page, please email me at my direct email address at paulvjax@gmail.com
Best regards my friend and may you enjoy your best year ever.
Paul Verticchio
FRANK
Jan 28, 2011
Vit
Thank you, Len! That's a big job you did...i'm not a guitar tech, so it's not for me. I just removed the piece of plastic on the headstock,cause I thought that the rod is too short and it's possible to fix the problem by moving a stop washer further . On the x-ray that i did i saw that the rod is touching the stop washer and the nut is still too concave.
I can move the washer ahead but it doesn't help, the rod is moving freely inside of the neck and it's not broken, so I'm sure that something happened on the other side, neck joint, cause now i hear strange noise when i shake the guitar.I suspect that the bulb that is supposed to hold the rod on the neck joint somehow is not connected to truss rod anymore...
Oct 21, 2013
Paul Verticchio
I’ve sworn off publicly posting so I send you my thoughts via this message.
Here are couple facts:
LO Jr.s are chosen by most players because they facilitate controlled feedback when sustaining a note at a saturated volume. Feedback in this case is not related to an overabundance of microphonics within the pickup coil or shell.
This should not be confused with “squealing” which is caused by excessive gain in the player’s signal chain.
Your customer would be well served by trying pickups with a slightly lower output to minimize the current condition.
As a humorous query: does he actually perform on 10 less than a meter from his amp? Any guitar will feedback under that condition 😉
This is one of those things that players have to make logical choices to eliminate. He may have to rethink any gain based device in his signal chain, essentially his choice of instruments as he’s playing “the most wonderfully resonant guitars ever produced. Again, most guitarists choose the LP Jr expressly for that reason.
Also, if he’s using a tube amp he may have a noisy preamp valve. If that’s the case, he should have his amp checked and serviced by a QUALIFIED tube amp technician.
There’s also the possibility that his playing distance and position is greatly contribute to the problem.
If he’s an experienced touring player, the latter is not the likely issue as 99% of guitarists figure this out on their own within a month of taking up the instrument.
Let me know if my info was germane to your eventual
resolution of the customer’s concerns.
btw: since I no longer post on the main page, please email me at my direct email address at paulvjax@gmail.com
Best regards my friend and may you enjoy your best year ever.
Paul Verticchio
Jan 23, 2024