• Male
  • Odessa
  • Ukraine
Share on Facebook MySpace
  • Blog Posts
  • Discussions

Vit's Friends

  • Len Biglin

Vit's Page

Profile Information

Comment Wall (1 comment)

At 11:56pm on October 20, 2013, Len Biglin said…

Hi Vit , yes I fixed it but it was a big job . I removed the frets and planed the fretboard away , it was not easy , the pickups were glued in . I removed the old rod , and routed a channel down the centre line and fitted a bi-flex truss rod with adjustment at the headstock . Then fitted an ebony fretboard and normal frets . If you do this wear a mask as I believe carbon fibre is not good to breath .Also note that there is no fretboard , the neck is one piece of basswood covered in C/F. You will need good skills , it is not an easy job , good luck !


You need to be a member of FRETS.NET to add comments!



© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service