Forum Discussions (4,424)
| Discussions | Replies | Latest Activity |
|---|---|---|
removing back on f5what is the best way to remove the back on an F5 mandolin glued with aliphatic glue? Started by gavin d baird in Luthier Talk |
4 |
Mar 31, 2010 Reply by FRANK |
Classical Guitar "V" Neck Joint ConstructionI read an article in an Luthier's Guild publication that featured a Mr. Geza's V-joint construction techniques. Mr. Geza fabricated the ne… Started by Cameron Petersen in Metalworking, Machining, Tool & Fixture Making for Luthiers |
2 |
Mar 30, 2010 Reply by Cameron Petersen |
importance of type of woodcan somebody please tell me the importance of the following woods in the final sound of a guitar top bottom side bracing kerfing neck fre… Started by Happy Builder in Luthier Talk |
2 |
Mar 30, 2010 Reply by Happy Builder |
process importancewhile building a guitar which process or processess are most important e.g. top thickness bracing yes i understand that all processes are… Started by Happy Builder in Luthier Talk |
1 |
Mar 29, 2010 Reply by Frank Ford |
himalayan cedarhas any one used himalayan cedar for top its other name is deodar if yes then what should be its thickness Started by Happy Builder in Luthier Talk |
19 |
Mar 29, 2010 Reply by Happy Builder |
different side and back woodif the back is of rosewood can i make the side of mahagony / walnut / oak yes i know oak is not a tonewood but do you need sides to be of t… Started by Happy Builder in Luthier Talk |
0 | Mar 29, 2010 |
easiest wood to bendwhich is the easiest tonewood to bend will it make any difference if the side wood is same as back or diferent than the bak wood Started by Happy Builder in Luthier Talk |
0 | Mar 29, 2010 |
bracing widthi am making a guitar as per a plan according to the plan where i need 16 mm bracing i have only 15 mm where it says 10 mm i have 8 mm will… Started by Happy Builder in Luthier Talk |
0 | Mar 29, 2010 |
RG560 Ebanez Elc. Guitar StickerHi my friends I am in trouble I just refinished the neck of a RG560 Ebanez for a coustomer and a piece of the masking has taken some of the… Started by William F.Eden in Luthier Talk |
5 |
Mar 28, 2010 Reply by William F.Eden |
kerf continous or fully cuti would like to use cut kerfs i mean seperate pieces of tringular woods not connected to each other at all will it make any difference and… Started by Happy Builder in Luthier Talk |
10 |
Mar 28, 2010 Reply by Happy Builder |
© 2026 Created by Frank Ford.
Powered by
