Forum Discussions (4,420)
| Discussions | Replies | Latest Activity |
|---|---|---|
Charlie Christian pick-up removalTrying to remove a vintage Charlie Christian pick-up assembly. Any tips? Really tight fit, does the mount come apart? Thanks. Started by Stephen Morgan in Luthier Talk |
2 |
Jul 17, 2020 Reply by Stephen Morgan |
Source For Inlay/Overlay MaterialAny recommendation as to a source for pearloid/celluloid material as shown on the fingerboard of this Stromberg Voisinet? https://godzil… Started by Redacted in Luthier Talk |
1 |
Jul 17, 2020 Reply by Ed Minch |
New stew mac heat stickHas anyone tryed the new Stew Mac heat stick method of neck removal? Started by peter meyer in Luthier Talk |
10 |
Jul 9, 2020 Reply by Tai Fu |
LTd PIVOT POltsI am looking for a Set of pivot bolts for my LTD...the trem is like a floyd but says edge o it Started by joe butkins in Luthier Talk |
2 |
Jul 5, 2020 Reply by joe butkins |
Scale length for resonator guitarIn measuring the scale length for a resonator guitar, do you measure to the exact center of the spider bridge slot or to the front of said… Started by Allen L Wall in Luthier Talk |
2 |
Jul 3, 2020 Reply by Allen L Wall |
Gibson L5 tailpiece .Hi everyone , I have a customer who has an L5 from '34 , the tailpiece has torn apart with metal fatigue . These seem to be notoriously sca… Started by Len Biglin in Luthier Talk |
2 |
Jul 3, 2020 Reply by Len Biglin |
Proper method of cleaning/removing decades of surface dirt, grime & etc. from old lacquer finishes.Where to start with an instrument from 1928-30 that has wonderful checking. I know I cannot get aggressive but I have a finally guitar on t… Started by Redacted in Luthier Talk |
9 |
Jul 2, 2020 Reply by onewent |
Headstock Break (inherited)I recently had this one handed to me. Belongs to a buddy who thought breaking it once was not enough so he did it twice. 1990 Guild D-25NT.… Started by Lee Baker in Luthier Talk |
4 |
Jun 27, 2020 Reply by Brian Stewart |
Super glued Martin neck/body jointSo I'm working on a Martin with the laminated neck , with a bad neck angle...I saw it was a bolt on type , so I told the customer it would… Started by thefishinmusician in Luthier Talk |
19 |
Jun 27, 2020 Reply by Brian Stewart |
Guild F-212-XL dovetailDoes anybody know how far in from the edge of the fingerboard I need to drill to hit the edge of the dovetail for a neck re-set, so I can f… Started by Bob Gaddis in Luthier Talk |
2 |
Jun 24, 2020 Reply by Bob Gaddis |
© 2026 Created by Frank Ford.
Powered by
