FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Actually, the frets were pushed in from the side with a hand held caul and a foot op…"

Russell Vance replied Dec 13, 2009 to Fender frets

 9 Dec 16, 2009
Reply by Paul Breen

"In addition, Len Biglin scores high - often you will get a guitar with metal knobs w…"

Russell Vance replied Dec 13, 2009 to pick up noise

 13 Dec 14, 2009
Reply by Len Biglin

"Yep, if the noise is intense, it's a bridge wire grounding problem. But, with enough…"

Russell Vance replied Dec 12, 2009 to pick up noise

 13 Dec 14, 2009
Reply by Len Biglin

"I have resisted the temptation to try and reinvent the wheel when I build, and I am…"

Russell Vance replied Dec 10, 2009 to Building new, alternative to dovetail ?

 16 Dec 14, 2009
Reply by Ned Knepp

"It isn't the caps (cap are caps, given a standard 300/500k potentiometer set in a LP…"

Russell Vance replied Dec 10, 2009 to wireing a les paul?

 10 Dec 12, 2009
Reply by Len Biglin

"Actives and passives are mutually exclusive - Emgs use 25k pots and passives use 250…"

Russell Vance replied Dec 7, 2009 to Help with finishing,and active with passive pick-up

 3 Dec 7, 2009
Reply by Russell Vance

"Franks on the money here, one of our principle repairs are Gibson pegheads, which ar…"

Russell Vance replied Dec 7, 2009 to Help with finishing,and active with passive pick-up

 3 Dec 7, 2009
Reply by Russell Vance

"Allparts have a lot of inlayed knobs, - buy them, remove the inlays and put your own…"

Russell Vance replied Dec 5, 2009 to guys i am trying to source crome domes with the inlayed tops the catch being

 12 Dec 9, 2009
Reply by FRANK

"Hi, Steven, I use the coarse Stewmac diamond file(150 grit) followed by a clean up w…"

Russell Vance replied Nov 25, 2009 to What steps do you use to polish frets after leveling/crowning?

 13 Dec 30, 2009
Reply by Pierre-Antoine Roiron

"So what's the difference between the two guitar players in the photo: ones an ugly,…"

Russell Vance replied Nov 24, 2009 to Finally got some help around the shop....

 5 Nov 26, 2009
Reply by Ron Frazier

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service