FRETS.NET

Andrew's Discussions (584)

Search Forum

View

Discussions Replied To (559) Replies Latest Activity

"On my latest job Ive been putting a 30 watt incandescent bulb inside under the crack…"

Andrew replied Feb 25, 2016 to "Interesting" top crack issue

 12 Feb 26, 2016
Reply by Doc Rathwell

"I found this: http://boutique.rickenbacker.com/SADDLE-12-STRING-BRIDGE_p_755.html N…"

Andrew replied Feb 20, 2016 to Rickenbacker 12 string bridge

 3 Feb 20, 2016
Reply by Andrew

"1. Well I for one can't see any other reason to have the 'set' screws in that config…"

Andrew replied Feb 20, 2016 to Rickenbacker 12 string bridge

 3 Feb 20, 2016
Reply by Andrew

"No, that seems legitimate."

Andrew replied Feb 16, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"I dont think that was necessary, Paul. Noone's panties got twisted."

Andrew replied Feb 16, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"I wondered. Assuming the wood wasnt stained first (could be the case since it seems…"

Andrew replied Feb 15, 2016 to Chips in finish

 2 Feb 15, 2016
Reply by Matt Dreher

"Is that an opaque black lacquer, or something else thats appearing dark/opaque in th…"

Andrew replied Feb 15, 2016 to Chips in finish

 2 Feb 15, 2016
Reply by Matt Dreher

"I would also say using the smaller radius press cauls before the actual radius could…"

Andrew replied Feb 12, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"Did you bevel the edges of the fret slots before putting the frets in? Also, I alway…"

Andrew replied Feb 12, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"Well, I did that to myself last year. I had to take apart a reset I had just done as…"

Andrew replied Feb 12, 2016 to Neck Re-Set Gallery

 153 Jun 22, 2023
Reply by LarrySB

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service