FRETS.NET

Jim Bancroft's Discussions (316)

Search Forum

View

Discussions Replied To (304) Replies Latest Activity

"Maybe your pipe is too hot. I use a 1 1/2" galvanized pipe for what bending I do, mo…"

Jim Bancroft replied Apr 2, 2009 to Bending wood

 29 Oct 27, 2017
Reply by Ron Frazier

"The mortise and tenon joint is also glued. You need to apply steam to the joint in t…"

Jim Bancroft replied Apr 2, 2009 to Removing bolt on Martin neck.........

 7 Apr 27, 2009
Reply by thefishinmusician

"I doubt you can learn this from a book. On the job experience is the best teacher. I…"

Jim Bancroft replied Apr 1, 2009 to Bending wood

 29 Oct 27, 2017
Reply by Ron Frazier

"There are a few way I can think of to get the neck block back into position. I'm sur…"

Jim Bancroft replied Mar 31, 2009 to Martin body cracked along fingerboard, one side only

 12 Apr 3, 2009
Reply by David Houchens

"You need to remove the neck to get complete access to the neck block. You probably w…"

Jim Bancroft replied Mar 30, 2009 to Martin body cracked along fingerboard, one side only

 12 Apr 3, 2009
Reply by David Houchens

"Don't quit understand what you are doing with the fingerboard? But, if it has no fin…"

Jim Bancroft replied Mar 30, 2009 to stained fingerboard

 7 Apr 3, 2009
Reply by Mark Tripp

"Don't know who suggested that you do not readjust the heel to the body? They are wro…"

Jim Bancroft replied Mar 30, 2009 to National Neck Reset

 9 May 4, 2009
Reply by Ted Vig

"Has the cracked piece moved toward the soundhole? If not, I doubt the neck block has…"

Jim Bancroft replied Mar 30, 2009 to Martin body cracked along fingerboard, one side only

 12 Apr 3, 2009
Reply by David Houchens

"Simplest and best way, my opinion only, is to add a 3/32" piece of same the same mat…"

Jim Bancroft replied Mar 30, 2009 to Binding gap on 1990s Guild

 3 Mar 30, 2009
Reply by Jim Bancroft

"No problem trying to improve things. Give it try and see if you like the design. Jim"

Jim Bancroft replied Mar 30, 2009 to please advise ---X-brace notch

 13 Apr 8, 2009
Reply by Mark Tripp

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service