FRETS.NET

Greg Mirken's Discussions (636)

Discussions Replied To (634) Replies Latest Activity

""OK, I'll tell you the location of the rebel base! Just loosen the Recover Correctio…"

Greg Mirken replied Nov 20, 2017 to A solution in search of a problem...

3 Nov 21, 2017
Reply by Murray MacLeod

"Wow, the finish is as thick as the side!"

Greg Mirken replied Oct 22, 2017 to Ventura D-35 neck reset

8 Oct 22, 2017
Reply by John Yungbluth

"Steve, I feel for you, but you need to remember "Martin copy" means made to look lik…"

Greg Mirken replied Oct 21, 2017 to Ventura D-35 neck reset

8 Oct 22, 2017
Reply by John Yungbluth

"Not a problem, generally. As long as the truss rod has a tiny bit of tension on it […"

Greg Mirken replied Oct 1, 2017 to Double acting truss rods and fretwork

4 Oct 3, 2017
Reply by Jon Cooper

"Can you push the sides into alignment with your thumbs? If the crack runs obliquely…"

Greg Mirken replied Sep 26, 2017 to Parallel cracks in guitar side

2 Sep 27, 2017
Reply by David Farmer

"Keep in mind the nut only affects the open string- once you fret it the nut material…"

Greg Mirken replied Aug 4, 2017 to Nut Materials??

30 Sep 16, 2017
Reply by Mike Kolb

"About 4 years ago I replaced the last in a long line of crappy bench lamps with one…"

Greg Mirken replied Jul 7, 2017 to QUALITY BENCHTOP SWING LAMP???

11 Jul 21, 2017
Reply by Frank SIlano

"Just mask the top surface of the board and spray the binding up to the corner. Regar…"

Greg Mirken replied Jun 20, 2017 to neck finishing

3 Jun 20, 2017
Reply by Greg Mirken

"Trying to use acetone is a Bad Idea. In a situation where the top grain undulates al…"

Greg Mirken replied May 22, 2017 to Vintage acoustic pick guards applied with solvent

11 Jun 23, 2017
Reply by Chris Vallillo

"Before doing what Frank suggests, I'd have the guitar owner take the instrument back…"

Greg Mirken replied May 2, 2017 to lacquer woes, old & new

12 May 3, 2017
Reply by Dave Richard

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service