FRETS.NET

William F.Eden's Discussions (620)

Search Forum

View

Discussions Replied To (601) Replies Latest Activity

"Thanks for the input Hesh, I myself use the scalloped bracing plus the forward shift…"

William F.Eden replied Mar 18, 2013 to I would like to start a discussion on what you think makes your acoustic guitar sound so good

 14 Mar 21, 2013
Reply by Jeff Highland

"I use a Multi purpose Oscillating tool for cutting the neck off. You just tape a pie…"

William F.Eden replied Mar 15, 2013 to Laminated neck reset-delam concerns

 10 Mar 18, 2013
Reply by Mark A. Kane

"I would not think you should have any problems it's not like you were going to take…"

William F.Eden replied Mar 15, 2013 to Laminated neck reset-delam concerns

 10 Mar 18, 2013
Reply by Mark A. Kane

" Kerry many years ago I worked on a four drum sander in a factory and the sander dru…"

William F.Eden replied Mar 14, 2013 to Thickness sander

 35 Mar 20, 2013
Reply by nick-p

"I am having trobel getting the pictures on I did put yellow with a we bit of red in…"

William F.Eden replied Mar 13, 2013 to 1933/34 Gibson L-00 top radius?

 13 Mar 13, 2013
Reply by William F.Eden

"I just used a little red brown to shade  it in.Bill. here are the back and sides"

William F.Eden replied Mar 13, 2013 to 1933/34 Gibson L-00 top radius?

 13 Mar 13, 2013
Reply by William F.Eden

"Look's very nice Brian .Keep on trucking you can do it. Bill............"

William F.Eden replied Mar 13, 2013 to Cutting 3ply pick guard material ?

 16 Mar 13, 2013
Reply by William F.Eden

"Yes the one I done over was  #9595 But the one I had only had the one brace under th…"

William F.Eden replied Mar 9, 2013 to 1933/34 Gibson L-00 top radius?

 13 Mar 13, 2013
Reply by William F.Eden

"Robert if I am working on a Guitar the way you are and dont know what the Radius is…"

William F.Eden replied Mar 8, 2013 to 1933/34 Gibson L-00 top radius?

 13 Mar 13, 2013
Reply by William F.Eden

"Well I am shure this Guitar is what you are working on .I done this Guitar over for…"

William F.Eden replied Mar 8, 2013 to 1933/34 Gibson L-00 top radius?

 13 Mar 13, 2013
Reply by William F.Eden

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service