FRETS.NET

Pierre-Antoine Roiron's Discussions (585)

Search Forum

View

Discussions Replied To (563) Replies Latest Activity

"I strongly think that starting with a kit is a good starting point : there are enoug…"

Pierre-Antoine Roiron replied Oct 19, 2011 to "Planning" for my first guitar build

 6 Oct 19, 2011
Reply by Mike Kolb

"I don't know if the motor can do it, you'll have to try. But if you want to try, dec…"

Pierre-Antoine Roiron replied Oct 18, 2011 to Need technical advice: building electrical frame-saw (3 blades)

 10 Oct 18, 2011
Reply by Bart van Weperen

"Considering that the motor is only 240W (did I misread?), some kind of gearbox reall…"

Pierre-Antoine Roiron replied Oct 17, 2011 to Need technical advice: building electrical frame-saw (3 blades)

 10 Oct 18, 2011
Reply by Bart van Weperen

"I would be afraid that the ladder brace would not stand the big torque a pin bridge…"

Pierre-Antoine Roiron replied Oct 15, 2011 to Convert floating bridge to pin bridge

 12 Oct 16, 2011
Reply by Magnus Hultin

"I would use un-thinned yellow glue, because now that the glue joints are not clean a…"

Pierre-Antoine Roiron replied Oct 12, 2011 to Help with Failed Attempt to Repair Top Cracks

 18 Oct 16, 2011
Reply by Ned Knepp

"Even half-old fossiles like me usually have a hard time reading all caps messages. W…"

Pierre-Antoine Roiron replied Oct 10, 2011 to O.C.G.A.S.

 5 Oct 10, 2011
Reply by Pierre-Antoine Roiron

"medium heat?"

Pierre-Antoine Roiron replied Oct 10, 2011 to Flattening old Bakelite pick guards and source for new guards?

 30 Oct 13, 2011
Reply by Kerry Krishna

"It's weird that Oscar Schmidt tells you it's metric. Well if it worked on 10/32, you…"

Pierre-Antoine Roiron replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"4.2mm is the nominal diameter for the inside of a M5 nut. You need a 5mm nut. That s…"

Pierre-Antoine Roiron replied Oct 7, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

"I'm not sure to understand : you don't have to measure the outside of the nut, but t…"

Pierre-Antoine Roiron replied Oct 6, 2011 to Truss rod pushed down into the guitar neck

 26 Oct 11, 2011
Reply by Michael P. Lemieux

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service