FRETS.NET

Philip Secrist
  • Male
  • Ogden, UT
  • United States
Share on Facebook Share

Philip Secrist's Discussions

Cupped Back Halves
1 Reply

Hi guys! Happy New year!I pulled out a set of Madagascar Rosewood back and sides from my stickered storage (about 6 years) and discovered that the back halves have cupped or warped (one side more…Continue

Started this discussion. Last reply by Roger Häggström Jan 3.

Sand-Throughs on Finished Binding Edge
6 Replies

I refinished the back on a one year old guitar (nitro finish) after repairing a crack. I had masked the top, neck, and sides right up to the back binding edge so I could spray the back. After…Continue

Started this discussion. Last reply by Robbie Collins Apr 3, 2017.

Hairline Cracks in Macassar Ebony Back
26 Replies

I built a dreadnought guitar with a three piece back out of beautiful Macassar Ebony with sap wood. There are 3 long hairline cracks that have opened up in the sapwood area of the back. (See the…Continue

Started this discussion. Last reply by Howard Klepper Mar 9, 2017.

Finish Defect
1 Reply

I had a tight crack in the back of a dreadnought I am building that I thought I had adequately repaired and filled before finishing. I applied the finish, let it cure for 15 days, and then leveled,…Continue

Started this discussion. Last reply by Mark Fogleman May 23, 2016.

 

Philip Secrist's Page

Comment Wall

  • No comments yet!

You need to be a member of FRETS.NET to add comments!

Join FRETS.NET

 
 
 

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service