FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"Echoing what Ned said, it's hard to see how this could have been professionally repa…"

Greg Mirken replied Nov 16, 2013 to Dent Repair Help Needed

 17 Dec 12, 2013
Reply by Mark Fogleman

"Sigmas are no better or worse than any other Asian guitar. They are not built anythi…"

Greg Mirken replied Nov 12, 2013 to Sigma guitars, poor man's Martin?

 6 Nov 14, 2013
Reply by Ned Knepp

"Either hide glue or Titebond will work fine. 'Course if it gets dried out again it w…"

Greg Mirken replied Nov 12, 2013 to Martin D16RGT with back seam split

 4 Nov 12, 2013
Reply by thefishinmusician

"I'll echo Kerry's advice. Have a look at the Canadian Godin instruments if you can.…"

Greg Mirken replied Oct 23, 2013 to Saddle on a Flinthill dread too high and leaning forward.

 4 Oct 23, 2013
Reply by Greg Mirken

"I cut strips from mylar-backed 'sandpaper' I get from MicroMark. Also undercut the h…"

Greg Mirken replied Oct 18, 2013 to Help with neck reset...what method to taper heel?

 14 Mar 15, 2017
Reply by Dave Richard

"If this is a bolt-on neck it sure seems easier to take material from the heel than t…"

Greg Mirken replied Oct 11, 2013 to Can you do a "California Neck Reset" for a cutaway?

 6 Oct 12, 2013
Reply by Donald A. Fortune

"There are reasonably accurate electronic hygrometers. Look at laboratory suppliers o…"

Greg Mirken replied Oct 10, 2013 to Relative humidity at different temperatures

 18 Oct 13, 2013
Reply by Peter Laine

"Talk to Taylor Customer Service. Unless they have changed their customer service phi…"

Greg Mirken replied Oct 9, 2013 to Taylor Acoustic Neck Reset

 19 Oct 10, 2013
Reply by Don Korth

"In response to your last post, Brian, how well it flattens out is key. A little heat…"

Greg Mirken replied Oct 8, 2013 to Gluing a Martin Pickguard that DOESN'T have any "wood fibers" stuck to it

 12 Oct 11, 2013
Reply by steve carmody

"If your customer prefers the original guard (many do) it will glue just fine with Ti…"

Greg Mirken replied Oct 7, 2013 to Gluing a Martin Pickguard that DOESN'T have any "wood fibers" stuck to it

 12 Oct 11, 2013
Reply by steve carmody

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service