FRETS.NET

Mike Kolb's Discussions (1,104)

Search Forum

View

Discussions Replied To (1007) Replies Latest Activity

"Yes on beveling the slots (just a quick swipe with a small triangular file will do i…"

Mike Kolb replied Feb 12, 2016 to Seating frets - how well is well enough?

 30 Feb 22, 2016
Reply by Russell Holland

"Oh, you're right!  Ordered with the pot, the little warmer is only a couple of bucks…"

Mike Kolb replied Feb 9, 2016 to Hot Hide Glue Pot

 15 Feb 2, 2017
Reply by Walter W Wright

"Yeah that does seem like a long time. I see that the little pot is available separat…"

Mike Kolb replied Feb 8, 2016 to Hot Hide Glue Pot

 15 Feb 2, 2017
Reply by Walter W Wright

"It was a Sears Craftsman and probably Chinese-made. Since parts were easy to order,…"

Mike Kolb replied Feb 8, 2016 to Fret-pressing horror story...

 7 Feb 9, 2016
Reply by Joe Stodddard

"In this particular case yesterday the crack had opened to about .020" so it just nee…"

Mike Kolb replied Feb 7, 2016 to Ibex Splint Knife (and Splint Former)?

 3 Feb 7, 2016
Reply by Mike Kolb

"Good timing!  I just used the splint-maker yesterday to make a long splint for a vio…"

Mike Kolb replied Feb 7, 2016 to Ibex Splint Knife (and Splint Former)?

 3 Feb 7, 2016
Reply by Mike Kolb

"Sure, an arbor press where it's appropriate and usable.... but sometimes you need th…"

Mike Kolb replied Feb 7, 2016 to Fret-pressing horror story...

 7 Feb 9, 2016
Reply by Joe Stodddard

"Love the small size of it.  Sure, looking-forward to the report! "

Mike Kolb replied Feb 5, 2016 to Hot Hide Glue Pot

 15 Feb 2, 2017
Reply by Walter W Wright

"Yowzuh... that's nice.  Must try that one of these days!"

Mike Kolb replied Feb 5, 2016 to Small-diameter plug cutters?

 19 Feb 5, 2016
Reply by Andrew

"So I finally used the "glue-a-block-to-a-dowel-and-turn-on-a-sander" method and it g…"

Mike Kolb replied Feb 5, 2016 to Small-diameter plug cutters?

 19 Feb 5, 2016
Reply by Andrew

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service