FRETS.NET

Andrew's Discussions (584)

Discussions Replied To (559) Replies Latest Activity

"I included that method in the post that my tablet boogered up, and my pea sized bran…"

Andrew replied Nov 22, 2014 to So.. where's my math error?

44 Nov 23, 2014
Reply by Ned Knepp

"I just typed up a very cogent rebuttal, and then IOS 8 froze and ate it. Now Im grum…"

Andrew replied Nov 22, 2014 to So.. where's my math error?

44 Nov 23, 2014
Reply by Ned Knepp

"Im siding with Occam on this one too. Regarding the calculation, I dont believe fret…"

Andrew replied Nov 22, 2014 to So.. where's my math error?

44 Nov 23, 2014
Reply by Ned Knepp

"Hmm, didnt know that. Hopefully the quality of those names doesnt suffer. At least t…"

Andrew replied Nov 17, 2014 to Power string winders

17 Nov 25, 2014
Reply by John

"Second Russel's recommendation. I have a 7.2 volt lithium ion skil driver/drill that…"

Andrew replied Nov 16, 2014 to Power string winders

17 Nov 25, 2014
Reply by John

"Im gonna have to write that one down somewheres."

Andrew replied Oct 16, 2014 to Botched nut channel--filed into fingerboard material

8 Oct 17, 2014
Reply by Russell Holland

"Id apply a drop of naphtha or mineral spirits to the bare areas to see what the colo…"

Andrew replied Oct 16, 2014 to Neck break touch up

11 Dec 22, 2015
Reply by Charlie Bowerbank

"Theyre not so bad if you know what techniques are safe and what is risky, same as an…"

Andrew replied Oct 12, 2014 to Resawing burls?

8 Oct 13, 2014
Reply by Russell Vance

"Yes that is basically the plan Ned, I failed to mention that. Also, the material los…"

Andrew replied Oct 12, 2014 to Resawing burls?

8 Oct 13, 2014
Reply by Russell Vance

"Ive never had to straighten a neck with heat but Ive straightened a few other pieces…"

Andrew replied Oct 12, 2014 to Bent Gibson H1 madola neck - what is the best course of action

11 Oct 14, 2014
Reply by Mike Keen

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service