FRETS.NET

Pierre-Antoine Roiron's Discussions (585)

Search Forum

View

Discussions Replied To (563) Replies Latest Activity

"Thank you Franck. On the last to X-series I worked on, bracing was reduce to strict…"

Pierre-Antoine Roiron replied Nov 13, 2010 to Bracing question

 6 Nov 13, 2010
Reply by Pierre-Antoine Roiron

"Aren't the mahogany topped Martin's 15 series braced with mahogany?"

Pierre-Antoine Roiron replied Nov 12, 2010 to Bracing question

 6 Nov 13, 2010
Reply by Pierre-Antoine Roiron

"Whatever oil will do the trick. I even use olive oil for the kitchen slabs. Go for t…"

Pierre-Antoine Roiron replied Nov 8, 2010 to Fretboard Finish Treatment

 5 Nov 8, 2010
Reply by Pierre-Antoine Roiron

"Good ending, good job. I would have fill the rod slot and re-slot it using a modern…"

Pierre-Antoine Roiron replied Nov 8, 2010 to Martin non adjustable truss rod flip

 7 Nov 10, 2010
Reply by Fritz Froeschner

"Don't bother to fill the slot, just clean it. Use a taller blank bone nut."

Pierre-Antoine Roiron replied Nov 8, 2010 to Nut disaster

 1 Nov 8, 2010
Reply by Pierre-Antoine Roiron

"You can do whatever you want. Usually, woods like ebony, rosewood, wenge are not coa…"

Pierre-Antoine Roiron replied Nov 5, 2010 to Fretboard Finish Treatment

 5 Nov 8, 2010
Reply by Pierre-Antoine Roiron

"You'll have to spray the burst. For the initial yellow staining, you can wipe. If yo…"

Pierre-Antoine Roiron replied Nov 4, 2010 to mandolin sunburst staining

 17 Nov 9, 2010
Reply by Rodney Smith

"I would reinforce too. Maybe only two pilars. By the way, be carefull when cutting t…"

Pierre-Antoine Roiron replied Nov 4, 2010 to adding pre-amp to Martin DX1

 6 Nov 5, 2010
Reply by William F.Eden

"For a black red yellow sunburst, I stain the wood with yellow, seal it with a clear…"

Pierre-Antoine Roiron replied Nov 3, 2010 to mandolin sunburst staining

 17 Nov 9, 2010
Reply by Rodney Smith

"That may be hard to find. I think your best try could be to phone or e-mail Graphtec…"

Pierre-Antoine Roiron replied Oct 30, 2010 to Piezo saddle for tune-o-matic bridge

 1 Oct 30, 2010
Reply by Pierre-Antoine Roiron

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service