FRETS.NET

Paul Breen's Discussions (450)

Search Forum

View

Discussions Replied To (439) Replies Latest Activity

"Polyvinyl acetate is white or Elmers glue, Aliphatic Resin is yellow carpenters glue…"

Paul Breen replied Aug 29, 2011 to Can Titebond be used to repair joints previously glued with PVA.

 13 Sep 4, 2011
Reply by Magnus Hultin

"The problem is usually caused by low string angle over the saddle or an uneven saddl…"

Paul Breen replied Aug 29, 2011 to Martin under saddle transducer...Little, if any, output on high E

 7 Sep 3, 2011
Reply by Jeffrey L. Suits

"Yea!   Thanks for posting the good news."

Paul Breen replied Aug 24, 2011 to Martin 1833 Shop no longer selling fret wire

 21 Mar 10, 2015
Reply by Barry Chern

"Thanks Greg,   It's been a few years but I think I charged $400 for the tuner repair…"

Paul Breen replied Aug 1, 2011 to PLUG CUTTER / DRILL

 5 Aug 1, 2011
Reply by Paul Breen

"This works quit well when you need a custom size plug cutter and matching drill bit,…"

Paul Breen replied Jul 29, 2011 to PLUG CUTTER / DRILL

 5 Aug 1, 2011
Reply by Paul Breen

"I cut the old ones off with nippers like Frank shows in his method but I heat the po…"

Paul Breen replied May 27, 2011 to Heat it up! Replacement tuner buttons

 6 May 27, 2011
Reply by Paul Breen

"I make my own heating irons from scrap Aluminum that I buy from a local machine shop…"

Paul Breen replied Mar 31, 2011 to LMI Heating Blankets Vs Stew Mac Bridge Heater and Fingerboard Iron

 8 Mar 31, 2011
Reply by Cyrus Comiskey

"Have you tried dry clamping yet to see what happens? I would do that before resignin…"

Paul Breen replied Mar 27, 2011 to Kalamazoo mandolin repair

 5 Mar 29, 2011
Reply by Dave Richard

"If the top has finish on it I use this stuff.   http://www.lmii.com/CartTwo/thirdpro…"

Paul Breen replied Mar 8, 2011 to Glue for pickguard

 3 Mar 9, 2011
Reply by mike carne

"Thanks Frank, the face plate has not been replaced. It has been over sprayed though…"

Paul Breen replied Mar 3, 2011 to I Need help with regluing a snapped-off headstock

 42 Nov 29, 2018
Reply by Terry Chapman

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service