FRETS.NET

Pierre-Antoine Roiron's Discussions (585)

Search Forum

View

Discussions Replied To (563) Replies Latest Activity

"With CA glue and nitro you can achieve good touch-ups. Not invisible but correct."

Pierre-Antoine Roiron replied Aug 28, 2010 to Takamine EF360SBG finish???

 7 Aug 28, 2010
Reply by Vic Farrell

"If it's your first project, don't bother with this. Try to make a good straight fret…"

Pierre-Antoine Roiron replied Aug 27, 2010 to help in fretting work

 13 Aug 30, 2010
Reply by Tim Mace

"Yes, the picture seem to show a good work."

Pierre-Antoine Roiron replied Aug 27, 2010 to Removing rust from finish

 18 Aug 27, 2010
Reply by Justin

"Problem is global because economy is global. If we want to control species extinctio…"

Pierre-Antoine Roiron replied Aug 25, 2010 to Madagascar rosewood

 40 Aug 27, 2010
Reply by Russell Vance

"Most of the time, considering that it's really hard to be sure of the wood source re…"

Pierre-Antoine Roiron replied Aug 23, 2010 to Madagascar rosewood

 40 Aug 27, 2010
Reply by Russell Vance

"I think the Steinberger sold by stewmac will make it, but I'm not sure if it's a dir…"

Pierre-Antoine Roiron replied Aug 14, 2010 to Firebird Banjo tuners

 1 Aug 14, 2010
Reply by Pierre-Antoine Roiron

"I scrap the finish. If it's too thick, I start with my dremel router and then switch…"

Pierre-Antoine Roiron replied Aug 13, 2010 to Removing finish under the bridge

 12 Aug 20, 2010
Reply by Jack Lord

"Paul's right. Finding a buzz is sometime spending a lot of time scratching silly thi…"

Pierre-Antoine Roiron replied Aug 13, 2010 to Acoustic Guitar Buzzing (I hear in my sleep)

 22 May 11, 2014
Reply by Ron frazier

"I think you would probably have to polish or sand it through the whole thickness to…"

Pierre-Antoine Roiron replied Aug 13, 2010 to Question about Oscar Schmidt Stella finish

 4 Aug 13, 2010
Reply by Frank Capo

"Paul, redressing or re-fretting is depending on the size of the bumps you can measur…"

Pierre-Antoine Roiron replied Aug 13, 2010 to Need some help with using the neck-jig....

 27 Sep 3, 2010
Reply by Pierre-Antoine Roiron

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service