FRETS.NET

Len Biglin's Discussions (610)

Search Forum

View

Discussions Replied To (490) Replies Latest Activity

"Hi Rick , I have had some sucess with these and I can say that a gas torch is your b…"

Len Biglin replied Jun 26, 2009 to Removing a broken whammy bar from the block.

 5 Jun 26, 2009
Reply by Rick Gentry

"Hi Rob , sometimes a truss rod will slip into the s/hole area , all it takes is for…"

Len Biglin replied Jun 16, 2009 to Neck removal problem

 10 Jun 19, 2009
Reply by Colin Brown

"Hi Guys , I am certainly no expert and have never made a classical guitar, but I use…"

Len Biglin replied Jun 12, 2009 to Classical guitar construction

 70 Jul 21, 2009
Reply by Donald A. Fortune

"This is unlikely , but I have seen new Martins where the machines are not tight and…"

Len Biglin replied Jun 12, 2009 to New Martin d28 B String Buzzes Tried evertything

 44 Aug 20, 2009
Reply by Joe Sanders

"In my experience nuts cannot be bought as a stock item , you need to work on them to…"

Len Biglin replied Jun 6, 2009 to Nut Size

 14 Jun 6, 2009
Reply by brums

"So the plug has come off the back of the spring terminals ? or the wires came off th…"

Len Biglin replied Jun 6, 2009 to Battery Pack repair for Epiphonic Six pre-amp - Help.

 3 Jun 6, 2009
Reply by William Lee

"well it doesn't matter much about the bottom thickness , but as I say make it to mat…"

Len Biglin replied Jun 5, 2009 to Nut Size

 14 Jun 6, 2009
Reply by brums

"Thanks for the tip Bob I think I'll try the No7.Len"

Len Biglin replied Jun 4, 2009 to Satin finish maintenance and top crack repair

 13 Jun 5, 2009
Reply by Fran Ledoux

"If it is an acoustic guitar then the nut usually sits at the end of the fretboard ,…"

Len Biglin replied Jun 4, 2009 to Nut Size

 14 Jun 6, 2009
Reply by brums

"thanks Rusty, I have that so I can let it wick in from the inside of the heel cheek.…"

Len Biglin replied May 25, 2009 to How to glue a crack in a new neck before laquering it.

 2 May 25, 2009
Reply by Len Biglin

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service