FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Yes, thanks Pierre-Antoine, I could have been a little more tactful there - and your…"

Russell Vance replied Nov 10, 2012 to Single coil hum

 22 Nov 14, 2012
Reply by MrGlyn

"I made the mistake of mentioning a similar thing that happens with Kinman pickups fr…"

Russell Vance replied Nov 10, 2012 to Single coil hum

 22 Nov 14, 2012
Reply by MrGlyn

"Jack, I don't normally comment about commercial issues, but in this case it's neces…"

Russell Vance replied Nov 8, 2012 to Binding on neck has a green hue

 13 Nov 10, 2012
Reply by Pierre-Antoine Roiron

"Hi len, Main problems I have had with ebony boards (and we use a lot of them - mainl…"

Russell Vance replied Nov 5, 2012 to New Ebony Board any tips for fretting ?

 6 Nov 24, 2012
Reply by Tom West

"It wont help, but it's not the cause of the problems with the frets seating.  It wil…"

Russell Vance replied Nov 2, 2012 to Fretting over frets...

 11 Nov 3, 2012
Reply by Mark A. Kane

"John, The vibration you are feeling when you file the fret ends means your frets are…"

Russell Vance replied Nov 2, 2012 to Fretting over frets...

 11 Nov 3, 2012
Reply by Mark A. Kane

"I'm cautious of being critical of larger manufacturers as I think we as luthiers can…"

Russell Vance replied Oct 29, 2012 to Am I losing it or what

 9 Oct 30, 2012
Reply by Hesh Breakstone

"Hi Stefano,a bit less than one quarter of an inch (6.5mm) seems to be an average sor…"

Russell Vance replied Oct 28, 2012 to Depth of the neck at the heel

 5 Oct 28, 2012
Reply by Stefano

"Hi Christian, I use shiny brown plastic packing tape (the thin stuff used at the pos…"

Russell Vance replied Oct 23, 2012 to Shattered headstock on Tenor Guitar

 7 Oct 24, 2012
Reply by Christian Johnson

"The curved laminated boards vary a bit from observation but greater than 1/16th and…"

Russell Vance replied Oct 21, 2012 to Bound Round laminated Rosewood fingerboards? What does it mean?

 14 Oct 23, 2012
Reply by Paul Verticchio

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service