FRETS.NET

Kerry Krishna's Discussions (1,028)

Discussions Replied To (907) Replies Latest Activity

"I ended up using the new built thickness sander and used the ebony cutoffs from the…"

Kerry Krishna replied Oct 21, 2011 to Best way to cut a fretboard reveal edge on for binding.

9 Oct 21, 2011
Reply by John

"I could....   "

Kerry Krishna replied Oct 20, 2011 to Best way to cut a fretboard reveal edge on for binding.

9 Oct 21, 2011
Reply by John

"Here is the finished photo essay. Thanks for the responses  of the Forum members her…"

Kerry Krishna replied Oct 19, 2011 to Power fret slotting jig I built...

14 Oct 19, 2011
Reply by FRANK

"Ned, I have not done a mock up yet, still thinking about the bracing."

Kerry Krishna replied Oct 17, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"Here is the bracing of the 12 fret one that I have Ned. The 1st guitar I will be wor…"

Kerry Krishna replied Oct 17, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"One problem solved... The blade was in backwards... That is all taken care of.  Now…"

Kerry Krishna replied Oct 17, 2011 to Power fret slotting jig I built...

14 Oct 19, 2011
Reply by FRANK

"Howdy again on this thread folks.  After chucking the KING tabletop saw out into the…"

Kerry Krishna replied Oct 17, 2011 to Power fret slotting jig I built...

14 Oct 19, 2011
Reply by FRANK

" Tim, solid 'pressed' top, not sure about the bolts, probably what was posted on the…"

Kerry Krishna replied Oct 16, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"Anyone?"

Kerry Krishna replied Oct 16, 2011 to Arch top guitar to pin bridge conversion......

12 Oct 17, 2011
Reply by Ned Knepp

"Ned, would it work for Philip if  he masked off the entire top, except for the splin…"

Kerry Krishna replied Oct 16, 2011 to Help with Failed Attempt to Repair Top Cracks

18 Oct 16, 2011
Reply by Ned Knepp

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service