FRETS.NET

Mike Kolb's Discussions (1,104)

Discussions Replied To (1007) Replies Latest Activity

"Just my 2 cents...I think hot hide glue or titebond would do well, on the theory tha…"

Mike Kolb replied Mar 13, 2011 to Binding on old Washburn

6 Mar 15, 2011
Reply by Jim Bancroft

"The typical buffer for what we do will usually like to run between 750-850rpm.  Soun…"

Mike Kolb replied Mar 13, 2011 to Haze in finish after buffing

15 Mar 13, 2011
Reply by William F.Eden

"Well, yeah, it's a fine unit.... but (not meaning to dismiss it's use) take a gander…"

Mike Kolb replied Mar 7, 2011 to Shop organization advice?

15 Mar 8, 2011
Reply by Tom Krebs

"Organization has been my achilles heel, always ending-up with little boxes of god-kn…"

Mike Kolb replied Mar 7, 2011 to Shop organization advice?

15 Mar 8, 2011
Reply by Tom Krebs

"There are some on eBay (repro's I think)....  if you contacted a friendly seller, he…"

Mike Kolb replied Feb 14, 2011 to Looking for info: L&H Shrine Ukulele

12 Feb 21, 2011
Reply by Jack C Clark

"Aha! ... yet another way to fend-off the dreaded neck reset :)"

Mike Kolb replied Feb 12, 2011 to Regluing a bridge with some sort of ledge on it?

8 Feb 16, 2011
Reply by Bruce Herrmann

"I think FF nailed it.... there's too much concentrated pressure on the narrow arms o…"

Mike Kolb replied Feb 8, 2011 to Archtop tail piece damage: Binding failure or?

16 Feb 9, 2011
Reply by Kerry Krishna

"And, as if your luck wasn't bad enough, I couldn't help but notice the Steelers logo…"

Mike Kolb replied Feb 6, 2011 to Mando stripped truss rod nut

9 Feb 7, 2011
Reply by Paul Verticchio

"Not that I have any answers, but the question intrigues me.  So, will each fret be s…"

Mike Kolb replied Feb 6, 2011 to Non-standard temperament conundrum

23 Mar 17, 2011
Reply by charley erck

"Bolt that sucker down. We exhausted the topic of bridge bolts a couple of times on t…"

Mike Kolb replied Feb 5, 2011 to Bridge Repair

5 Feb 5, 2011
Reply by Mike Kolb

RSS

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service