FRETS.NET

Paul Verticchio's Discussions (1,314)

Search Forum

View

Discussions Replied To (1308) Replies Latest Activity

"A GREAT solution to all Bigsby "tech terror" problems.  It'll probably work well wit…"

Paul Verticchio replied Jan 7, 2013 to Broken Bigsby Roll Pin

 2 Jan 9, 2013
Reply by lonnie james barber

"Hi Gary. I hope that it all turns out well for you.  We've all made similar 'oversig…"

Paul Verticchio replied Jan 7, 2013 to Customer Service Question

 23 Jan 9, 2013
Reply by nathan clark

"Hi David.  This was just a general question and was directed at no specific person o…"

Paul Verticchio replied Jan 5, 2013 to Cut Hole in Side of New D-35 for Preamp: Ethics and Methods

 17 Jan 5, 2013
Reply by Paul Verticchio

"Just curious..... Why are all of these old threads being reopened? This one is almos…"

Paul Verticchio replied Jan 5, 2013 to Cut Hole in Side of New D-35 for Preamp: Ethics and Methods

 17 Jan 5, 2013
Reply by Paul Verticchio

"Look at the weather checks in that finish.  If lacquer has to check (and it will), t…"

Paul Verticchio replied Jan 3, 2013 to Gibson LGO

 14 Jan 7, 2013
Reply by Tim Mace

"I'd use nothing more than Krylon or it's European equivalent.  Danno bodies are not…"

Paul Verticchio replied Jan 3, 2013 to How to finish masonite and plywood

 6 Jan 3, 2013
Reply by Robbie Collins

"Hi Rod. That cautionary tale only applies to the slug coil on a humbucker or the mag…"

Paul Verticchio replied Jan 3, 2013 to Pickup sanding

 26 Jan 4, 2013
Reply by tadej bratkovic

"Lee, Rusty speaks the truth about troubleshooting any electronic problem with the ac…"

Paul Verticchio replied Jan 2, 2013 to Ibanez SR506 revisited

 17 Jan 15, 2013
Reply by Lee Gendvilas

"Hi Lee. This instrument has active electronics. Without doing further research, I' w…"

Paul Verticchio replied Dec 31, 2012 to Ibanez SR506 revisited

 17 Jan 15, 2013
Reply by Lee Gendvilas

"Kerry, Honesty is ALWAYS the best path to take.  But you know, and practice, that fa…"

Paul Verticchio replied Dec 31, 2012 to Transparency: How far should I be actually going?

 18 Jan 7, 2013
Reply by Kerry Krishna

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service