FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"HI Lee, The D Limonene is used as a thinner for the Tung oil to assist in penetratio…"

Russell Vance replied Feb 27, 2019 to Linseed oil? Education needed.

 17 Mar 9, 2019
Reply by Lee Gendvilas

"i said  i wasn't going to continue engaging with this fuitile post but enough is eno…"

Russell Vance replied Feb 25, 2019 to How far to scrape top wood underneath the bridge?

 18 Feb 26, 2019
Reply by jbbancroft

"Hi John, The spontaneous combustion of oil soaked rags is caused by the oxidisation…"

Russell Vance replied Feb 25, 2019 to Linseed oil? Education needed.

 17 Mar 9, 2019
Reply by Lee Gendvilas

"Roger,  No its not "that old glue war again" otherwize I wouldn't have wasted my tim…"

Russell Vance replied Feb 25, 2019 to How far to scrape top wood underneath the bridge?

 18 Feb 26, 2019
Reply by jbbancroft

"Hi Alexis, Fortunately you do have other ways of learning: to understand how glues w…"

Russell Vance replied Feb 24, 2019 to How far to scrape top wood underneath the bridge?

 18 Feb 26, 2019
Reply by jbbancroft

"Hi John, The choices available for finishing fingerboard surfaces are many and as wi…"

Russell Vance replied Feb 12, 2019 to Linseed oil? Education needed.

 17 Mar 9, 2019
Reply by Lee Gendvilas

"Hi Dave,  What "clamping caul problems" are you experiencing.   We use radiused full…"

Russell Vance replied Feb 12, 2019 to Flexible strap clamps

 7 Feb 18, 2019
Reply by Ron Frazier

"Thanks all,  I ended up heat gun stripping the one with the cracks in the front and…"

Russell Vance replied Jan 16, 2019 to GIBSON ES-335 CHERRY RED FINISH SCHEDULE

 3 Jan 16, 2019
Reply by Russell Vance

"hi Nick. Sadowsky does  a three knob drop in active/passive module wire up and ready…"

Russell Vance replied Jan 15, 2019 to someone make me a simple bass preamp ?

 4 Feb 10, 2019
Reply by Walter W Wright

"HI Joe, We use Sperzel Trim locs as our standard tuner and we also retro fit them to…"

Russell Vance replied Dec 27, 2018 to Locking tuners

 5 Dec 28, 2018
Reply by joe butkins

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service