FRETS.NET

Paul Verticchio's Discussions (1,314)

Search Forum

View

Discussions Replied To (1308) Replies Latest Activity

"Hi Jeff. Excellent advice so far. +1 on rejecting the job. I checked with a friend o…"

Paul Verticchio replied Dec 24, 2012 to Acrylic Neck Break..You gotta see this one!!!!

 15 Dec 26, 2012
Reply by Jeff Perkins

"+1 on the Jaws 2 guys.  I've used that system for a few years. I'm extremely satisfi…"

Paul Verticchio replied Dec 22, 2012 to Newbie: Seating Frets to Consistent Height; Using cant file correctly.

 54 Dec 30, 2012
Reply by Jeffrey L. Suits

"You're very welcome Robbie. The only thing that concerns me with the sequencing of y…"

Paul Verticchio replied Dec 21, 2012 to Newbie: Seating Frets to Consistent Height; Using cant file correctly.

 54 Dec 30, 2012
Reply by Jeffrey L. Suits

"I'm glad that Robbie re-opend this.thread. I have a set of Channel Lock diagonal cut…"

Paul Verticchio replied Dec 21, 2012 to Channel Lock Plier Problem?

 17 Dec 23, 2012
Reply by John

"Hi Robbie. I know all this information is probably blowing your mind.  I'd like to o…"

Paul Verticchio replied Dec 21, 2012 to Newbie: Seating Frets to Consistent Height; Using cant file correctly.

 54 Dec 30, 2012
Reply by Jeffrey L. Suits

"Beautiful sounding instruments Jeff. Your Gypsy Jazzer sounds MUCH more full than th…"

Paul Verticchio replied Dec 20, 2012 to Two New Builds

 6 Dec 20, 2012
Reply by Paul Verticchio

"Hi Nathan, I used Stew-Mac #149 fretwire on both with a tang thickness" of .023. I a…"

Paul Verticchio replied Dec 12, 2012 to Problem: lacquer racking along fret slot on maple neck re-fret

 43 Jun 25, 2017
Reply by Walter W Wright

"Very nice job on the fret bender man!!  As a matter of fact, I'm going to modify min…"

Paul Verticchio replied Dec 12, 2012 to Problem: lacquer racking along fret slot on maple neck re-fret

 43 Jun 25, 2017
Reply by Walter W Wright

"I've run into brittle finishes on MIJ Fenders too Nathan.  I now  treat them like 60…"

Paul Verticchio replied Dec 12, 2012 to Problem: lacquer racking along fret slot on maple neck re-fret

 43 Jun 25, 2017
Reply by Walter W Wright

"Beautiful pictorial Nathan.  I always enjoy e-visiting FLGP.com I think the only ano…"

Paul Verticchio replied Dec 11, 2012 to Problem: lacquer racking along fret slot on maple neck re-fret

 43 Jun 25, 2017
Reply by Walter W Wright

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service