FRETS.NET

Greg Mirken's Discussions (636)

Discussions Replied To (634) Replies Latest Activity

"Here's a variant of Claus's entry above. Creative! "

Greg Mirken replied Jan 14, 2020 to Hall of "shame"

19 Mar 1, 2020
Reply by Claus Holm Jensen

"A few coats of a wipe-on Poly finish such as Minwax would be a good choice. Easy to…"

Greg Mirken replied Dec 31, 2019 to Uke finish

3 Jan 1, 2020
Reply by Ed Minch

"That's not damage from a stand. Perhaps the previous owner lived on a boat?"

Greg Mirken replied Dec 12, 2019 to Les Paul neck flaking.

5 Dec 14, 2019
Reply by Paul Breen

"Dampen a QTip with acetone and test on a small spot of the neck. To be really safe y…"

Greg Mirken replied Nov 18, 2019 to CA Glue on Finish

5 Nov 18, 2019
Reply by Mark Ballard

"I knew what he was referring to, but each time I tried to respond I threw up in the…"

Greg Mirken replied Nov 18, 2019 to Fender Palomino "Broomstick" removal?

14 Nov 22, 2019
Reply by steve carmody

"What finish is on this instrument? Anything that dissolves CA will dissolve nitrocel…"

Greg Mirken replied Nov 17, 2019 to CA Glue on Finish

5 Nov 18, 2019
Reply by Mark Ballard

"Of course. Don't know what I was thinking. If the #30, the "wedgiest" of them, doesn…"

Greg Mirken replied Oct 18, 2019 to Taylor Neck Reset - Stacking Shims?

10 Nov 13, 2019
Reply by Chris Shaltis

"I've never had to, but I don't see why you couldn't stack 'em."

Greg Mirken replied Oct 9, 2019 to Taylor Neck Reset - Stacking Shims?

10 Nov 13, 2019
Reply by Chris Shaltis

"Yup. The CA can only postpone the inevitable. At some point the guard will have to b…"

Greg Mirken replied Oct 3, 2019 to 70's 355 pickguard crumbling

8 Oct 7, 2019
Reply by Bob Harris

"Seems like you'll have to re-rout anyway to clean up that mess. You should charge ac…"

Greg Mirken replied Sep 22, 2019 to A little horror story....

8 Sep 23, 2019
Reply by Walter W Wright

RSS

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service