FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"Buy the one that sounds and plays like you want it to. Spend the same amount of mone…"

Russell Vance replied Sep 7, 2010 to Stratocaster vs Telecaster

 14 Sep 13, 2010
Reply by Doug T

"Yep, Gregs on the money, we image the instrument, the internals/serial number and an…"

Russell Vance replied Sep 7, 2010 to The missing link in restoring a Martin peghead

 5 Sep 8, 2010
Reply by Rich Mulcahy

"Yep, had this discussion with a colleague the other day as well, we use an overhead…"

Russell Vance replied Aug 31, 2010 to Up-cut or down-cut for saddle slot?

 3 Sep 2, 2010
Reply by Howard Klepper

"I see, but sometimes I don't comprehend - it appears everyone here is around 58 (jus…"

Russell Vance replied Aug 29, 2010 to Beveling top corners at ends of fret slots on a bound neck

 13 Aug 31, 2010
Reply by Ned Knepp

"Use a pillar file which has two file faces, with a sharp edge and a safe edge. The S…"

Russell Vance replied Aug 29, 2010 to Beveling top corners at ends of fret slots on a bound neck

 13 Aug 31, 2010
Reply by Ned Knepp

"Hi Gregory, hours worked is a good way to work out an eventual unit pricing for stan…"

Russell Vance replied Aug 28, 2010 to Let's talk pricing.

 10 Sep 29, 2010
Reply by LennyBrooks

"Thanks for that Howard, that was most helpful, Rusty."

Russell Vance replied Aug 27, 2010 to Madagascar rosewood

 40 Aug 27, 2010
Reply by Russell Vance

"Hi Ned, I agree entirely, and while the limits of forum chat are obvious and causes…"

Russell Vance replied Aug 27, 2010 to Madagascar rosewood

 40 Aug 27, 2010
Reply by Russell Vance

"Fact of the matter wqs I referred to South American Mahogany and other Australian sp…"

Russell Vance replied Aug 27, 2010 to Madagascar rosewood

 40 Aug 27, 2010
Reply by Russell Vance

"Yep, Ned, it's a vexing subject isn't it - I'm a full time commercial guitar builder…"

Russell Vance replied Aug 25, 2010 to Madagascar rosewood

 40 Aug 27, 2010
Reply by Russell Vance

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service