FRETS.NET

Paul Verticchio's Discussions (1,314)

Search Forum

View

Discussions Replied To (1308) Replies Latest Activity

"Hi Alex. A lot of the solution will depend on how much the customer is willing to pa…"

Paul Verticchio replied Sep 13, 2012 to Ibanez Soundgear 5 string bass repair

 1 Sep 13, 2012
Reply by Paul Verticchio

"Cool.....for you! Ya, I was trying to avoid the term "UFO whack job".  (: Good luck…"

Paul Verticchio replied Sep 13, 2012 to 6 inline plank open gear tuning machine

 5 Sep 13, 2012
Reply by Paul Verticchio

"Off topic: Are you related to the physicist, Stanton T Friedman?"

Paul Verticchio replied Sep 12, 2012 to 6 inline plank open gear tuning machine

 5 Sep 13, 2012
Reply by Paul Verticchio

"David, Given the late coming fact that it's a nylon string (NS) guitar, let me appen…"

Paul Verticchio replied Sep 12, 2012 to Help me out of this mess

 12 Sep 14, 2012
Reply by Donald A. Fortune

"Hi David. IF the fret leveling didn't take too much stock off the tops of the other…"

Paul Verticchio replied Sep 10, 2012 to Help me out of this mess

 12 Sep 14, 2012
Reply by Donald A. Fortune

"Hi T. What you have is a poorly made cheap guitar. If it IS a nylon string guitar, i…"

Paul Verticchio replied Sep 10, 2012 to Slanted fingerboard on a classical?

 3 Sep 10, 2012
Reply by Paul Verticchio

"Eric, Great suggestion/procedure.  I agree about the originality part.  Since the OP…"

Paul Verticchio replied Sep 5, 2012 to Re-gluing trapazoid fret markers?

 10 Sep 7, 2012
Reply by Gerry Hemming

"Hi Justin. I'm not a reso expert by any means.  However, that appears to be identica…"

Paul Verticchio replied Sep 5, 2012 to Need some help finding parts for National Resonator Mandolin

 3 Sep 5, 2012
Reply by Paul Hostetter

"Hi Gerry. If the markers are curling, they're probably made out of plastic. This als…"

Paul Verticchio replied Sep 5, 2012 to Re-gluing trapazoid fret markers?

 10 Sep 7, 2012
Reply by Gerry Hemming

"I'm of the same opinion: either method works well. One thing not mentioned so far is…"

Paul Verticchio replied Sep 4, 2012 to Refret jobs: hammer or press???

 15 Sep 9, 2012
Reply by Michael Shaw

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service