FRETS.NET

Russell Vance's Discussions (1,232)

Search Forum

View

Discussions Replied To (1220) Replies Latest Activity

"We do a lot of ebony - Madagascar, Gaboon, Maccassar etc - you are likely removing a…"

Russell Vance replied Mar 7, 2010 to Purplish Strain When Ebony Cleaning Fretboard

 10 Mar 12, 2010
Reply by Rob Mercure

"All the usual suspects - 1. check the grounding wire from the bridge/stoptail to the…"

Russell Vance replied Mar 5, 2010 to Thunderbird Issue

 7 Mar 14, 2010
Reply by David Payne

"Jerry, that's what I'm talking about - if anyone can do a seamless poly finish repai…"

Russell Vance replied Mar 5, 2010 to What to use for an Acrylic / Poly finish?

 21 Oct 24, 2012
Reply by Dave Yelverton

"No drama, poly is a substitute finish which is satisfactory if done well - its not p…"

Russell Vance replied Mar 5, 2010 to What to use for an Acrylic / Poly finish?

 21 Oct 24, 2012
Reply by Dave Yelverton

"Ned, you are now the equivalent author of the guitar version of "An Inconvenient Tru…"

Russell Vance replied Mar 2, 2010 to Taylor Setup Frequency

 14 Mar 4, 2010
Reply by Tim Mace

"Poly has a reputation out here - people generally get it in a plain brown paper bag…"

Russell Vance replied Mar 2, 2010 to What to use for an Acrylic / Poly finish?

 21 Oct 24, 2012
Reply by Dave Yelverton

"We had a series of Fenders (one of the Artist models) which were as noisy as a train…"

Russell Vance replied Feb 7, 2010 to Sympathetic Vibration in Fender Neck

 4 Feb 7, 2010
Reply by Randall Curtis Bowman

"15th fret, sliding dovetail, check that there is not an additional screw in the fron…"

Russell Vance replied Feb 6, 2010 to Neck reset 1962 Gretsch 6120 question

 3 Feb 18, 2010
Reply by Mark A. Kane

"If the micro adjuster is used to jack up the neck angle this takes a lot of the neck…"

Russell Vance replied Feb 5, 2010 to Three Bolt Strat with loose neck.

 6 Feb 8, 2010
Reply by Brian Michael

"Grahame is on the money - Fenders, especially the vintage bridge combined with the 5…"

Russell Vance replied Feb 5, 2010 to Adjusting lateral neck space

 4 Feb 5, 2010
Reply by Russell Vance

RSS

Members

© 2025   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service