FRETS.NET

Redacted's Discussions (26)

Discussions Replied To (15) Replies Latest Activity

"As seen here, Day 3, 600 grit glass beads: http://www.frets.com/FretsPages/Blogs/18…"

Redacted replied May 12 to Air Eraser/Mini Sandblaster - Finish Removal

6 May 12
Reply by Nathan Peirson

" Here are images Frank loaded on Frets.com as described previously: "

Redacted replied May 12 to Air Eraser/Mini Sandblaster - Finish Removal

6 May 12
Reply by Nathan Peirson

"An adjustable truss rod is a waste of time. Mass load the neck with a steel bar and…"

Redacted replied Jul 14, 2020 to Adding a truss rod to a classical guitar - Neck or sound hole nut?

5 Jul 28, 2020
Reply by Walter W Wright

"So do you classify bodily fluids, sticky substances, other filth and foreign matter…"

Redacted replied Jun 27, 2020 to Proper method of cleaning/removing decades of surface dirt, grime & etc. from old lacquer finishes.

9 Jul 2, 2020
Reply by onewent

"Sacrifice a saw blade and cut the tenon flush. Remove remnants of the insert. Make l…"

Redacted replied Jun 11, 2020 to Super glued Martin neck/body joint

19 Jun 27, 2020
Reply by Brian Stewart

"1.  Using a plane results in a superior gluing surface. 2.  I can't see how a table…"

Redacted replied Nov 1, 2019 to Brace radius jig

4 Nov 1, 2019
Reply by Redacted

"Solder the ball and wrapping."

Redacted replied Sep 20, 2019 to Tip: Loose ball end on string

5 Sep 21, 2019
Reply by Roger Häggström

"It would depend on what type of instrument you were building and what you were using…"

Redacted replied Aug 4, 2019 to Spruce/Pine " Made In Sweden "

4 Aug 4, 2019
Reply by Russell Vance

"The section that was glued is not aligned properly. But further up towards the waist…"

Redacted replied Jun 20, 2019 to Side Crack Repair

4 Jun 21, 2019
Reply by MARK HARRIS

"Could you provide photos of A-bracing the sound hole area please?  Also, recommenda…"

Redacted replied Jun 19, 2019 to How would you approach this repair?

12 Jun 20, 2019
Reply by Eric Gleason

RSS

© 2021   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service