FRETS.NET

Redacted's Discussions (32)

Search Forum

View

Discussions Replied To (21) Replies Latest Activity

"Sacrifice a saw blade and cut the tenon flush. Remove remnants of the insert. Make l…"

Redacted replied Jun 11, 2020 to Super glued Martin neck/body joint

 19 Jun 27, 2020
Reply by Brian Stewart

"1.  Using a plane results in a superior gluing surface. 2.  I can't see how a table…"

Redacted replied Nov 1, 2019 to Brace radius jig

 4 Nov 1, 2019
Reply by Redacted

"Solder the ball and wrapping."

Redacted replied Sep 20, 2019 to Tip: Loose ball end on string

 5 Sep 21, 2019
Reply by Roger Häggström

"It would depend on what type of instrument you were building and what you were using…"

Redacted replied Aug 4, 2019 to Spruce/Pine " Made In Sweden "

 4 Aug 4, 2019
Reply by Russell Vance

"The section that was glued is not aligned properly. But further up towards the waist…"

Redacted replied Jun 20, 2019 to Side Crack Repair

 4 Jun 21, 2019
Reply by MARK HARRIS

"Could you provide photos of A-bracing the sound hole area please?  Also, recommenda…"

Redacted replied Jun 19, 2019 to How would you approach this repair?

 12 Jun 20, 2019
Reply by Eric Gleason

"I figured that plastic and acetone were going to be one method.  There is one intact…"

Redacted replied Jun 17, 2019 to Stromberg Voisinet Venitian Binding Source

 5 Jun 17, 2019
Reply by Greg Mirken

"Please tell me how you would go about it. I need ideas because I need about 3 feet o…"

Redacted replied Jun 17, 2019 to Stromberg Voisinet Venitian Binding Source

 5 Jun 17, 2019
Reply by Greg Mirken

"Invert the colors. The negative effect can give some contrast."

Redacted replied Jun 15, 2019 to WRITING INSIDE GUITAR

 9 Jun 18, 2019
Reply by Mike Kolb

"Be aware you have to pay to have posting privileges. Also they are quite adamant abo…"

Redacted replied Sep 28, 2018 to Rickenbacker lap steel needs a tuner .

 5 Sep 28, 2018
Reply by Steven D. Wilson

RSS

Members

© 2023   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service