FRETS.NET

Greg Mirken's Discussions (636)

Search Forum

View

Discussions Replied To (634) Replies Latest Activity

"9 is finer than 7, but I suspect 7 by itself will do a fine job. Cotton t-shirt is f…"

Greg Mirken replied Sep 13, 2020 to Polishing order for mirror glaze products

 6 Oct 21, 2020
Reply by Freddie Cisneros

"Yes, I understand. Are you going to try to reglue the heel without removing the neck…"

Greg Mirken replied Aug 29, 2020 to 1953 Italian classical guitar, by Vincenza de Bonis: type of neck joint?

 5 Aug 29, 2020
Reply by Dave Richard

"If the goal is to make it as unobtrusive as possible, the best thing to do is stop n…"

Greg Mirken replied Aug 28, 2020 to First repair would love to hear pro feedback... Question on finishing???

 9 Aug 28, 2020
Reply by J45joe

"Hard to believe a handmade European classical guitar from that era wouldn't have a S…"

Greg Mirken replied Aug 28, 2020 to 1953 Italian classical guitar, by Vincenza de Bonis: type of neck joint?

 5 Aug 29, 2020
Reply by Dave Richard

"The one I have is branded "Scunci" and, of course, it's no longer available, but thi…"

Greg Mirken replied Aug 22, 2020 to Stewmac Heat Stick

 37 Jul 8, 2021
Reply by Dave Richard

"My old espresso machine died years ago, so I got a hand-held steam cleaner gizmo and…"

Greg Mirken replied Aug 22, 2020 to Stewmac Heat Stick

 37 Jul 8, 2021
Reply by Dave Richard

"Walter, I can assure you that I have encountered, and corrected, this exact issue on…"

Greg Mirken replied Aug 17, 2020 to Puzzling intonation issue: first 4-5 frets note sharp

 17 Sep 2, 2020
Reply by Dave Richard

"Yes, I have actually done this on a Gibson guitar. It was several years old, and had…"

Greg Mirken replied Aug 14, 2020 to Puzzling intonation issue: first 4-5 frets note sharp

 17 Sep 2, 2020
Reply by Dave Richard

"Sounds like the nut to first fret distance is just too long; an issue I have encount…"

Greg Mirken replied Aug 10, 2020 to Puzzling intonation issue: first 4-5 frets note sharp

 17 Sep 2, 2020
Reply by Dave Richard

"Whatever your technique, if you are successfully finding and correcting high frets,…"

Greg Mirken replied Jul 29, 2020 to Fret Rocker - proper use?

 2 Jul 30, 2020
Reply by Mark McLean

RSS

Members

© 2024   Created by Frank Ford.   Powered by

Badges  |  Report an Issue  |  Terms of Service