Hey all,Can you recommend a good router for guitar work? Looking for something small (small shop with limited space) and want to cut pickup cavities and binding with it.Is a tilt base needed to cut…Continue
Started this discussion. Last reply by mr smits Dec 5, 2020.
Hey all. I beveled my fret ends too much (strings slip off the fret), so I'd like to refret the neck. I'm concerned when I remove these frets the slots will be too large because it will be the 2nd…Continue
Started this discussion. Last reply by Beerent Jan 15.
Hey all.-Have you tried the stewmac heatstick for removing necks?-If so, how was it? Did it work and heat/loosen the neck in a reasonable time? Any wood burn? Etc-Where the larger holes you have to…Continue
Started this discussion. Last reply by Freddie Cisneros Oct 20, 2020.
Hey all,This might be a stupid question, but I have seen several youtube videos describing different techniques - notably whether the guitar should be under tension or not, when using the rocker.I…Continue
Started this discussion. Last reply by Mark McLean Jul 30, 2020.
© 2021 Created by Frank Ford.
Powered by
Comment Wall
You need to be a member of FRETS.NET to add comments!
Join FRETS.NET